9. Installation
In this chapter you can configure the installation setting and perform channel search. Menus such as channel search, software update and default setting are included in this section.
Note:
•When you select Installation and press the OK button, you will be prompted to enter your password. Enter the password to proceed.
•Press the EXIT button to save the changes and return to the previous menu. Press the MENU button to exit the menu screen.
Tip: The default password is 0000.
9.1Channel Search
1. Press the MENU button.
2. Select Installation using the / button and press the OK button.
3. Select Channel Search using the / button and press the OK button.
4. Select Frequency and enter the frequency using the NUMERIC(0~9) buttons.
5. Select Symbol Rate and press the OK and / button. If the required value is not available, select User Define and enter the symbol rate directly.
6. Select Network ID and enter the value using the NUMERIC (0~9) buttons.
7. Select Search and press the OK button.
8. Please wait for finishing the channel search. If you
want to stop the channel search, press the OK button.
9. Press the OK button to save the result.
GB46
User’s Manual
