8. Automatic Search
It is possible to use automatic search using the DiSEqC 1.2 motorised system.
1.Ensure that the positions for the satellite you want to search is correct.(see Section 3 and 5 above)
2.In the Main Menu, select the option channel searching and press the OK button.
3.In the Service Searching menu, select the Antenna Alternative that you have set for this satellite.
4.When you search new services, please refer to Automatic Search of page GB32.
5.When the search has finished, press the OK button to store and view the services.
Now that you have stored all the positions of the satellites and searched for all the services you want, you can now use your receiver as normal. When you change to a service that is being transmitted from a different satellite, you will have to wait a few seconds to allow the motor to move into position to receive the new service.
