Humax ND-1000C manual Advanced Set-up TV Setup, UHF Output Channel

5. Functions Guide

•Advanced Set-up TV Setup

This function allows configuration of the picture ratio for the subscribers TV between 4:3 and 16:9.

1.Move to ‘Advanced Setup’ in the ‘System Settings’ screen and press the OK( ) button.

2.The PIN code input window appears. Input the configured PIN code and then press the OK( )button.

3.Select ‘TV Setup’ in the ‘Advanced Setup’ screen and then press the OK( )button.

4.Configure the TV picture ratio appropriate to the user’s TV either 4:3 or 16:9 by using

the button and then press the OK( )button.

UHF Output Channel

This function allows selection of the RF output channel of the Set-Top Box. The default setting is CH E36 (591.25 MHz)

1.Move to ‘Advanced Setup’ in the ‘System Settings’ screen and press the OK( )button.

2.The PIN code input window appears. Input the configured PIN code and then press the OK( )button.

3.Select ‘UHF Output Channel’ in the ‘Advanced Setup’ screen and then press the OK( )button.

4.Select the disired UHF Channel from the list displayed and press OK( )button.

5.The Set-Top Box will now provide its RF output on the chosen UHF Channel.

42