Cables Routed Behind Mounting Bracket

1 Gimbal Mounting Bracket

2 Grommet

3 Hole Cover

3

1

2

9.Thread the cables through the opening in the back of the cable collector cover.

10.Insert cable connectors into the proper recesses on the cable collector insert. The cable connectors are keyed to prevent reverse installation, so be careful not to force the connectors into the wrong slots. If you don’t have a cable for every hole in the insert, install the blank plugs to protect the control head from the weather.

Inserting the Cables into the Cable Connector Insert

 

5

1

6

2

 

 

3

 

 

 

 

 

 

 

4

 

 

 

 

1

Power

Not Used

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Communications

Cable Collector Cover

5

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Temp/Speed

Cable Collector Insert

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11.Line up the cable collector insert and cover, with the keying feature, then slide the cover into place on the insert.

9