Select Nav Readouts

Select Nav Readouts sets the individual digital readouts that will be used only during navigation on all non-instrument views. This feature allows you to select what information will be displayed in each of a variable number of fixed-position readouts arranged at the bottom of the screen on various views, or whether a particular readout will be turned off, displaying nothing in that area. Readout positions can also display information from supported accessories such as Temp/Speed.

NOTE: All views except the instrument views share the same set of 5 readouts that can be set one way for navigation mode using Select Nav Readouts, and another set of 5 readouts that can be set another way for non-navigation mode using Select Readouts. Non-navigation readouts are automatically replaced on the display when navigating. Navigating readouts can have any type of information in them. You can set these 5 readouts with navigation mode settings, so that, when you are navigating, these views contain navigation data instead of the regular settings. See Navigation X-Press™ menu: Select Readouts for more information about non-navigation settings.

To Select Nav Readouts:1.Highlight Select Nav Readouts on the Navigation X-Press™ menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate this procedure.

3.The Select Nav Readouts submenu will appear, showing a list of all readouts to be shown during navigation. Use the UP or DOWN Cursor keys to select a particular readout position, then use the RIGHT or LEFT Cursor keys to change what will be displayed at that position.

NOTE: The selections for each readout will vary, depending on which view you are in and which readout position you are setting. See the preceding table to find your view and the selectable readouts that are available for each readout position in that view.

Each readout position can either be empty or contain one of the items from the following table:

76