Humminbird 120 manual Operating the Platinum ID, Using the BUILT-IN Simulator

USING THE PLATINUM ID 120

OPERATING INSTRUCTIONS

OPERATING THE PLATINUM ID

This section provides complete information on operating the Platinum ID through its front panel controls. You are encouraged to read this information completely as you first learn to use the Platinum ID; doing so will ensure you make the most of its many features and functions.

The first part of this section explains the use of the built-in simulator, which you can use to practice selecting instructions through the front panel. The remaining instructions, which can be followed while using the simulator or in actual operation, explain each function and are organized according to the front panel layout.

The Platinum ID includes a built-in simulator that helps you learn to use your new equipment. The simulator displays a typical underwater scene, and lets you practice with the controls.

USING THE BUILT-IN SIMULATOR

The unit must be powered off before you start the simulator. To activate it, press down and hold the POWER button until a chirping sound begins. Release the button, and the built-in simulator begins displaying a typical Platinum ID reading.

You can use the simulator to learn the functions explained in the following pages, just as if you were getting actual on-the-water readings (but note that “Sensitivity” is disabled). To turn off the simulator, turn off the unit by pressing the POWER button again.

Of course, the best way to learn to use the platinum ID is with actual use, especially in familiar waters. If you know what’s below and see it on-screen, you’ll quickly become a Platinum ID expert.