GPS uses a constellation of 24 satellites that continually send radio signals to the earth. Your present position is determined by receiving signals from up to 16 satellites and measuring the distance from the satellites.

All satellites broadcast a uniquely coded signal once per second at exactly the same time. The GPS receiver on your boat receives signals from satellites that are visible to it. Based on time differences between each received signal, the GPS receiver determines its distance to each satellite. With distances known, the GPS receiver mathematically triangulates its own position. With once per second updates, the GPS receiver then calculates its velocity and bearing.

The GPS Receiver included with your 300 SeriesTM Fishing System, allows you to combine easy-to-use FishingGPSTM chartplotter and navigation capabilities with advanced fishfinding. The following GPS functionality is currently supported by the 300 SeriesTM Fishing System:

View current position

View current track (breadcrumb trail)

View precision speed and heading from your GPS receiver

Save tracks, waypoints and routes

Travel a route and navigate from one waypoint to the next.

Your unit also comes with a built-in Uni-MapTMwith a more detailed map of North America (Domestic models) or a more detailed map of Europe and Southeast Asia, including Australia and New Zealand (International models).

Your 300 SeriesTM uses the GPS Receiver to determine the position of the boat automatically, and uses the zoom level settings on a particular view to select the best chart to display. See Viewing Cartography for more information.

4

Page 11
Image 11
Humminbird 363 manual