Digital Depth Source

(Advanced, Down Imaging™ models with optional- purchase transducers only [561 DI, 570 DI, & 571 HD DI])

Settings: Auto, 2D Element; Default = Auto

Digital Depth Source specifies the beam that will be used to provide the depth for the digital depth readouts (see Views and Setup Menu Tab:Select Readouts for more information). It is important to set this menu option based on the transducer that is connected to the control head, as follows:

If a Down Imaging™ transducer is connected to the control head, select Auto. Depending on the depth, Auto will automatically choose the 2D conical beam or the Down Imaging™ beam to display depth in the digital readout window. Auto is the default setting.

If an accessory transducer is connected to the control head, select 2D Element. For example, if you connect an ice transducer to your Down Imaging™ unit, change the digital depth source to 2D Element in order to display depth in the digital readout window. The 2D Element setting should not be used with a Down Imaging™ transducer.

NOTE: Contact our Customer Resource Center to determine which accessory transducers are compatible with your Humminbird® Fishing System, or visit our Web site at humminbird.com.

Imaging Palette

(Down Imaging™ Views only [561 DI, 570 DI, and 571 HD DI])

Settings: Dark, Light, Inverse; Default = Dark

Imaging Palette allows you to select which monochrome palette you would like to use for the Down Imaging™ display.

Sonar Menu Tab

61