Humminbird 4089701 Digits Format, Demonstration, Sound Control, Speed Calibration, (Advanced), Sound Control, Speed Calibration, (Advanced, with Temp/Speed only)

Speed Calibration(Advanced, with Temp/Speed only)

Settings: -20% to +20%; Default = 0%

Speed Calibration will adjust the speed readout by the percentage entered, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once.

Digits Format

(Advanced)

Settings: Small tenths, Large tenths, No tenths; Default =

Small tenths

Digits Format adds a tenth decimal place to the readouts such as Temperature and Depth. Use the settings to change the display of the decimal place or remove it from the digital readouts. Examples of the different settings are displayed below. Also, see Select Readouts and Views.

Small tenths Large tenths No tenths

Demonstration

Settings: Off, Visible; Default = Visible

Demonstration controls whether the Demonstration Mode is visible or off. The Demonstration Mode appears on the screen if you don’t press any keys during the warning screen at power up. Menu settings cannot be saved in Demonstration (see Power On and Start-Up Options Menu).

Sound Control

Settings: No Sounds, Alarms Only, All Sounds; Default =

All Sounds

Sound Control allows you to set when the control head will beep or sound because of key presses and/or alarms.

Setup Menu Tab 67