Humminbird 4090501 Reset XTE, Chart Declutter, Grid, Delete, Target, Reset XTE, Chart Declutter, (only when Navigating), Go To starts navigation to the waypoint

The Waypoint Submenu includes the following menu options:

Edit opens the Edit Waypoint dialog box so that you can edit the selected waypoint. See Introduction to Navigation and the Humminbird®Waypoint Management Guide for more information.

Delete allows you to delete the waypoint.

Go To starts navigation to the waypoint.

Target applies a target to the waypoint.

Grid applies a trolling grid to the waypoint.

Reset XTE

(only when Navigating)

Settings: Press the RIGHT Cursor key to activate.

Reset XTE is available during navigation. When it is selected, the cross track error (XTE) will be recalculated from the boat’s current position to the next waypoint in the route.

For example, when you’ve deviated from a route to navigate around an island, select Reset XTE to update the unit’s course calculations from the current boat position instead of from the previous waypoint in the route.

Chart Declutter

Settings: Press the RIGHT Cursor key to activate.

Chart Declutter removes all chart layers except for land outlines, waypoints, routes, and tracks. The chart will stay decluttered for 10 seconds, and then it will refresh to its previous display settings. To refresh the view faster than 10 seconds, press the +/– Zoom keys.

NOTE: See Chart Menu Tab: Chart Detail Level for more information.

Navigation X-Press™ Menu 100