Humminbird 4090501 MARK Key, GOTO Key, ZOOM (+/–)Key, Active Cursor:, Without Active Cursor:, If Screen Snapshot is active, Views: Snapshot and Recording View

MARK Key

Press the MARK key while in any view to mark the position of a waypoint. The MARK key function works if you have the GPS receiver connected.

•Active Cursor: The waypoint will be marked at the cursor location.•Without Active Cursor: The waypoint will be marked at the boat location.

•If Screen Snapshot is active, a waypoint will be created, and a screen snapshot will also be saved to the optional-purchase SD card (see Views: Snapshot and Recording View). Navigation is not affected by the Screen Snapshot feature.

NOTE: If Screen Snapshot is enabled but there is not a GPS receiver connected, pressing the MARK key will capture the screen image and display an error saying that a GPS position fix is requiredto create a waypoint.

NOTE: You must have an optional-purchase SD card installed for the screen snapshot feature to work.

GOTO KeyThe GOTO key has multiple functions, which depend on the situation.

•Active Cursor: Press the GOTO key while in any view to create a waypoint and start navigation towards that waypoint.

•Without Active Cursor: Press the GOTO key to display the saved waypoints list, and then highlight a waypoint. Press the RIGHT Cursor key to begin navigation.

ZOOM (+/–) KeyThe Zoom (+/–) key has multiple functions, depending on the situation:

•In any of the Chart Views or the Sonar Zoom View, press the +/– Zoom key to change the scale of the view to appear closer or farther away. See Views and Introduction to Navigation for more information.

Key Functions 12