Humminbird 4090501 70

Nearest Current Station: Current information for the nearest current station to your present position will be displayed. This includes the position of the station and the current changes for today. Twographs are also presented that show the time, direction, and flow speed of the current changes for the 24 hour time period of today’s date. You can change the date to look at current information before or after the date displayed by pressing the LEFT or RIGHT Cursor key respectively. Press the EXIT key to remove the information box, and the cursor bull’s eye will be centered over the current station position. The cursor information boxes at the bottom of the display will indicate the distance and bearing to the current station from your present position.

Views

Contents

Page Thank You humminbird.com Page Power On How Sonar Works How GPS Works What’s on the 300 Series™ Control Head Key Functions What’s on the Down Imaging™ Display Views Introduction to Navigation The Menu System Start-UpOptions Menu X-Press™Menu Main Menu Sonar X-Press™Menu (Sonar Views only) Flasher X-Press™ Menu Navigation X-Press™Menu (Navigation views only) Snapshot and Recording X-Press™Menu Alarms Menu Tab Sonar Menu Tab Navigation Menu Tab Chart Menu Tab Setup Menu Tab Views Menu Tab Maintenance Troubleshooting Specifications Glossary Contact Humminbird® Power On 1.Press the POWER/LIGHT key When the Title screen is displayed, press the MENU key to access the If a transducer is not connected and you wait too long to select a How Sonar Works •Peak to Peak measures power output at the highest points DualBeam PLUS™ Sonar (DualBeam PLUS™ models only [386ci]) Down Imaging™ Sonar Dual Beam Ice Transducer How GPS Works •View current position •View current track (breadcrumb trail) •View precision speed and heading from your GPS receiver •Save tracks, waypoints, and routes What’s on the 300 Series™ Control Head Key Functions POWER/LIGHT Key Power On the Control Head: Power Off the Control Head: VIEW Key your fishing requirements (see Views or Views Menu Tab) NOTE: Press the EXIT key to cycle through the views in reverse order CHECK/INFO Key MENU Key 4-WAYCursor Control Key (LEFT, RIGHT, UP, or DOWN Cursor keys) Active Cursor: Chart View: Bird’s Eye View: MARK Key •Active Cursor: The waypoint will be marked at the cursor location •Without Active Cursor: The waypoint will be marked at the boat location If Screen Snapshot is active Views: Snapshot and Recording View EXIT Key The EXIT key has multiple functions, which depend on the situation: •If an alarm is sounding, press the EXIT key to cancel the alarm If a menu tab is selected If a menu is active SD Card Slot To insert an SD memory card: 1.Remove the SD memory card slot cover Add Maps to Your Fishfinder Auto Select: Select menu option in the Chart Menu Tab (see Chart Menu Tab: Chart Select) •Chart Layers: You can customize your Navigation Views by selecting which chart layers to display or hide (see Chart Menu Tab: Chart Detail Level) Import Navigation Data Import Humminbird® Navigation Data: Insert a loaded SD card into the control head card slot, and follow the on-screen Export Navigation Data To export all navigation data: 1.Insert an unlocked SD card into the SD card slot 3.Select Options > Select All and... > Export 4.Follow the on-screeninstructions to confirm or cancel the export To export selected navigation items: Update Software Required Equipment: To update the control head software: 1.Install a formatted SD memory card into the card reader connected to your PC Register your Fishfinder: Log on to humminbird.com. Click My Account. Set up a new account Download: What’s on the Sonar Display the area under your boat, including the following items: Understanding the Sonar Display Real Time Sonar (RTS™) Window Sonar Colors and Bottom View Bottom View WhiteLine SwitchFire™ Freeze Frame and Active Cursor Instant Image Update What’s on the Down Imaging™ Display Page Understanding the Down Imaging™ Display Interpreting the Display Down Imaging™ Sensitivity Views Default View: Customize: To customize your view rotation: You can choose which views are hidden or visible in your view rotation 2.Press the UP or DOWN Cursor keys to select a View To change the Digital Readouts: Sonar View Digital Readouts Sonar Zoom View Zoom Level Zoomed View numbers indicate the high and low range of the water which is being viewed Split Sonar View •Depth is displayed in the upper left hand corner Big Digits View Big Digits View provides digital data in a large, easy-to-seeformat Triplog Down Imaging™ View (Down Imaging™ models only [386ci DI]) Down Imaging™ View Freeze Frame: depth of the sonar return Zoom+: X-Press™Menu for more information Circular Flasher View Circular Flasher View When Ice Fishing Mode is on Set the Circular Flasher View Mode 1.Press the MENU key twice Ice Fishing Mode: Off Ice Fishing Mode: On To activate the Depth Cursor: Use the Depth Cursor to identify depth on the flasher display Set up: Activate: 4.Close the Cursor: Press the EXIT key Adjust the Zoom Range: Close Zoom: Snapshot and Recording View Snapshot and Recording View Snapshot and Recording Press the MENU key once in this view to open the X-Press Screen Snapshots 2.Press the RIGHT Cursor key View a saved Screen Snapshot from Chart View: Notes about Screen Snapshots: In Chart View, use the 2.Press the CHECK/INFO key, and select View Snapshot Recording and Playback Playback a Recording: Change Playback Settings: 1.Press the MENU key once to open the Snapshot and Recording X-Press™ Menu Stop Playback: 2.Highlight Stop Playback, and press the RIGHT Cursor key Notes about Playback: Navigation •Playback is paused automatically at the end of the recording Press the MARK key during Playback Bird’s Eye View To shift the eye point position EXIT key Chart View Shift/Pan: Info: Page Chart/Sonar Combo View Chart/Sonar Combo View Chart/Down Imaging™ Combo View Down Imaging™/Sonar Combo View Freeze Frame: Chart View Orientation Viewing Cartography Chart Info: Page Introduction to Navigation Waypoints, Routes, and Tracks Waypoints Routes •Completed Route Leg = Gray •Current Route Leg = Green •Future Route Leg = Gold Open the Waypoint Management Dialog Box Open the Waypoint Management Dialog Box 1.Press the MENU key twice to open the Main Menu 2.Press the RIGHT Cursor key until the Navigation Menu tab is selected What’s on the Waypoint Management Dialog Box Use the to manage your waypoints, routes, and tracks press the EXIT key to select the Options menu quickly Sort By: Scroll and View: Track Icon: Route Icon: Submenu: Save, Create, or Delete a Waypoint On any Sonar View or Down Imaging™ View, use the Instances Navigate to a Waypoint or Position From the Chart or Combo View, use the Skip a Waypoint: Cancel Navigation: Add a Waypoint Target or Trolling Grid Routes Create a New Route: New Route Dialog Box: Travel a Saved Route: Review Route Information: Tracks Clear the Current Track: Stop Tracking: Stop Tracking Navigation Menu Tab: Current Track Edit your Waypoints, Routes, Tracks, and Groups Visible on Chart View Hidden on Chart View Edit a Waypoint, Route, Track, or Group 1.Open the Waypoint Management dialog box Open the Submenu: 3.Select Edit, and press the RIGHT Cursor key Icon Category: The Menu System Start-Up Options Menu: Main Menu: Normal Simulator System Status Accessory Test lists the accessories connected to the system Page To use an X-Press™Menu: 1.In any view, press the MENU key once Press the UP or DOWN Cursor keys to highlight an 3.Reactivate the X-Press™Menu by pressing the UP or DOWN Cursor keys Total Screen Update Main Menu To use the Main Menu: 1.In any view, press the MENU key twice 2.Press the RIGHT or LEFT Cursor keys to highlight a menu tab •Press the EXIT keyto move quicklyto thetop of thetab Quick Tips for the Main Menu Note for all Menu Settings User Mode (Normal or Advanced) Page Sonar X-Press™Menu (Sonar Views only) (only when Navigating) Cancel Navigation (Advanced: Sonar, Split Sonar, Circular Flasher, and Big Digits Views only) •386ci: 0 to 1490 ft, 0 to 454 m (International Models only); Default •386ci DI: 0 to 990 ft, 0 to 327 m (International Models only); Default Auto: Reset XTE Bottom Range (Sonar Zoom View only when Bottom Lock is On) Bottom Lock (Sonar Zoom View only) Down Imaging™ Down Sensitivity controls how the sonar returns are displayed on the Down Imaging™ Views Increase the Down Sensitivity DI Enhance DI Enhance Page DI Colors Flasher X-Press™Menu (Circular Flasher View only) navigating NOTE: Menu options can be expanded or Menu Tab Page Page Color Palette (Circular Flasher View, Ice Fishing Mode only) Choose from the following color palettes: Palette 1: Green (weak), Yellow (medium), Red (strong) Palette 2: Yellow (weak), Green (medium), Red (strong) Navigation X-Press™Menu (Navigation Views only) provides a shortcut to your most frequently-used X-Press™ Skip Next Waypoint Waypoint [Name] (only with an active cursor on a waypoint) Waypoint [Name] Cursor to Waypoint Cursor to Waypoint (Chart or Combo View only) Save Current Track Clear Current Track Clear Current Track Remove Target (only if a Target is active) Remove Grid (only if a Grid is active) Sonar Window Chart Declutter Chart Declutter NOTE: See Chart Menu Tab: Chart Detail Level for more information Snapshot and Recording Start Recording (optional-purchaseSD Card, Snapshot and Recording View only) Stop Recording (optional-purchaseSD Card only) Stop Recording Delete Recording Delete All Recordings Delete All Recordings Pings Per Second Pings Per Second Playback Speed Playback Speed Playback Speed Icons: Record Slow Play Stop Playback Alarms Menu Tab Depth Alarm Depth Alarm Fish ID Alarm Fish ID Alarm Low Battery Alarm Temp. Alarm Temp. Alarm Off Course Alarm Arrival Alarm Drift Alarm Drift Alarm Alarm Tone Timer Setup •Time: Use the 4-WAYCursor Control key to set the hours, minutes, and seconds Save and Start: Save and Close: Start Timer Sonar Menu Tab Beam Select Beam Select allow you to choose 200/83 kHz, 200 kHz, or 83 kHz When set to 200 kHz Imaging Frequency Imaging Frequency Surface Clutter Surface Clutter SwitchFire™ Fish ID+™ Fish ID Sensitivity Fish ID Sensitivity Real Time Sonar (RTS™) Window RTS Window™ Sonar Colors and Big Digits View) •Gray: Light Gray (weak) to Black (strong) •Green: Dark Green (weak) to Light Green (strong) •Inverse: Black (weak) to White (strong) Zoom Width Zoom Width Views: Sonar Zoom View 83 kHz Sensitivity (Advanced, DualBeam PLUS™ Sonar only [386ci]) Noise Filter Max Depth Water Type Water Type Digital Depth Source DI Pings DI Pings All Beams DI Only Ice Fishing Mode Ice Fishing Mode Navigation Menu Tab Press the MENU key twice to access the Main Menu, then press the RIGHT Cursor key until the Navigation tab is selected Current Track Current Track Introduction to Navigation: Tracks The Current Track Submenu contains the following menu options: Save allows you to save the current track Waypoints, Routes, Tracks (Waypoint Management Dialog Box) Waypoint Settings Waypoint Settings Introduction to Navigation: Edit your Waypoints, Routes, Tracks, and Groups Saved Tracks Defaults The Saved Tracks dialog box includes the following options: Visibility allows you to set new tracks to visible or hidden Style Chart Orientation North Reference North Reference Waypoint Proximity Flags Waypoint Proximity Flags Waypoint Decluttering Waypoint Decluttering Trolling Grid Rotation Trolling Grid Rotation Introduction to Navigation: Add a Waypoint Target or Trolling Grid Track Min Distance Track Min Distance Track Color Range Map Datum Map Datum Course Projection Line Course Projection Line You can choose the style of the Course Projection Line as follows: •Standard = arrow = arrow Chart Menu Tab Lat/Lon Grid Lat/Lon Grid Navaids on Bird’s Eye View Navaids on Bird’s Eye View Chart Select Set Map Offset Set Map Offset Clear Map Offset Clear Map Offset Shaded Depth Chart Detail Level (optional-purchaseNavionics® charts only) Chart Detail Level Basic shows land areas, ports, obstructions, and restricted areas All Map Borders Map Borders Spot Soundings Spot Soundings Auto Zoom NOTE: The Auto Zoom setting does not apply to the Bird’s Eye View Auto Range Auto Range Viewing Cartography Offset Speed (with Vessel Offset turned on) Offset Speed Vessel Offset Contour Lines Water Level Offset Water Level Offset Shallow Water Highlight Shallow Water Highlight Lake List Scroll: Setup Menu Tab Units - Depth Units - Depth selects the units of measure for all depth-relatedreadouts Units - Temp Units - Temp International Models only Language Triplog Reset Triplog Reset Restore Defaults Use this menu choice with caution Select Readouts (Advanced, Sonar View and Down Imaging™ View only) Select Readouts Views Depth Offset Depth Offset Temp. Offset Temp. Offset will adjust the temperature readout by the amount entered Speed Calibration (Advanced, with Temp/Speed only) Speed Calibration Local Time Zone Local Time Zone Time Format Time Format Setup Menu Tab: Select Readouts Date Format Digits Format NMEA Output NMEA Output DPT - Depth MTW - Water Temperature GLL - Lat/Lon Position Demonstration Sound Control Sound Control Screen Snapshot Screen Snapshot Views Menu Tab NOTE: See Views for more information Control Head Maintenance Transducer Maintenance Troubleshooting Fishfinder Doesn’t Power Up •The power cable is properly connected to the Fishfinder control head •The fuse is operational •The battery voltage of the power connector is at least 10 Volts Display Problems Problem Possible Cause Finding the Cause of Noise Low battery voltage may be affecting the power of signal transmission Finding the Cause of Noise Possible Source of Noise Isolation Other electronic devices The boat’s engine 386ci Specifications Depth Capability Power Output 4000 Watts (Peak to Peak) 386ci DI Specifications Area of Coverage Page Glossary Sonar Terms: Beam (Sonar Beam) Cone Angle Cavitation Page Structure Time VariableGain (TVG) Zoom Zoom, Bottom Lock GPS & Navigation Terms: Altitude Cold Start Course Over Ground (COG) Heading Estimated Position Error (EPE) Fix Type GPS (Global Positioning System) How GPS Works Map Datum Present Position Time ToGo (TTG) SOG DTG Trackplotter Chartplotter Trolling Grid Contact the Humminbird® Customer Resource Center in any of the following ways: By Telephone: By e-mail: service@humminbird.com