Humminbird 531427-1_D Specifications

Specifications

Depth Capability..........................................................................................	1500 ft (500 m)
Power Output ......................................	500 Watts (RMS), 4000 Watts (Peak to Peak)
Operating Frequency ......................................	200 kHz and 83 kHz DualBeam PLUSTM
Area of Coverage............................................................................	60° @ -10 dB in 83 kHz
	20° @ -10 dB in 200 kHz
Target Separation..........................................................................	2 1/2 Inches (63.5 mm)
Power Requirement..............................................................................................	10-20 VDC
LCD ....................................................................................................................	640 V x 320 H
Transducer..............................................................................................................	XHS-9-20-T
Transducer Cable Length ....................................................................................	20 ft (6 m)

NOTE: Humminbird® verifies maximum stated depth in saltwater conditions, but actual depth performance may vary due to transducer installation, water type, thermal layers, bottom composition and slope.

NOTE: Product specifications and features are subject to change without notice.

96

Contents

Page Thank You How Sonar Works How GPS and Cartography Work Multi-MediaCard (MMC)/SD Slot What’s On the Display Views Key Functions Accessory Bus Powering Up the Unit The Menu System Start-UpOptions Menu Navigation X-Press™Menu (Navigation views only) Sonar Menu Tab Navigation Menu Tab Chart Menu Tab Alarms Menu Tab Setup Menu Tab Views Menu Tab Accessories Menu Tab Troubleshooting 700 Series™ Fishing System Accessories Specifications How Sonar Works •Root Mean Square (RMS) measures power output over the entire transmit cycle Peak to Peak DualBeam PLUS™ Sonar QuadraBeam™ Sonar WideSide® Sonar How GPS and Cartography Work Multi-MediaCard (MMC)/SD Slot Software Updates What’s On the Display Distance Average Speed Bait Ball Hard Bottom Structure Soft Bottom RTS® (Real Time Sonar) Window Views Sonar views: Sonar View Sonar View Understanding Sonar History Real Time Sonar (RTS®) Window Freeze Frame Bottom Presentation Bottom Contour Profile with RTS® Window Inverse Sonar Zoom View Sonar Zoom View 200/83 kHz Split Sonar View 200/83 kHz Split Sonar View Big Digits View Big Digits View Circular Flasher View Circular Flasher View Screen Snapshot View Screen Capture View Side Beam View Side Beam View WideSide® View WideSide View Bird’s Eye View Bird's Eye View Bird’s Eye View Chart View Chart View without Active Cursor Chart View with Active Cursor Combo View Combo View Depth View Orientation Viewing Cartography Introduction to Navigation Waypoints, Routes and Tracks Waypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Sort By Name Time Navigate to a Waypoint or Position Navigate to the cursor position: Add a Waypoint Target or Trolling Grid Chart View with Target Chart View with Grid Save, Edit or Delete a Route Save the current route: Save or Clear a Current Track Edit, Delete or Hide Saved Tracks Key Functions POWER/LIGHT Key VIEW Key INFO Key MENU Key Start-Up Options Menu 4-WAYCursor Control Key MARK Key GOTO Key ZOOM (+/-)Key EXIT Key Accessory Bus Powering Up the Unit 767 Title Screen The Menu System Sonar Tab, Normal Mode Sonar Tab, Advanced Mode Start-UpOptions Menu Normal Operation Simulator System Status Self Test System Status Self Test Screen Accessory Test Accessory Test GPS Diagnostic View GPS Diagnostic View PC Connect PC Connect Sonar X-PressTM Menu (Sonar views only) Sonar X-PressTM Menu Side To adjust the Side: Sensitivity Sensitivity at Low Sensitivity at Medium To adjust the Sensitivity: Upper Range (Advanced: Sonar, Split Sonar, Big Digits and Circular Flasher views only) To adjust the Upper Range: Lower Range To adjust the Lower Range: Side Beam Range To adjust the Side Beam Range: Chart Speed To adjust the Chart Speed: Bottom View Bottom View Bottom Black Bottom Presentation To adjust the Bottom View: Bottom Lock (Sonar Zoom view only) To turn on Bottom Lock: Navigation X-PressTM Menu (Navigation views only) Navigation X-PressTM Menu Waypoint [Name] (Only with an active cursor on a waypoint) To view the Waypoint [Name] Submenu: Waypoint[Name] Waypoint Submenu Cursor to Waypoint (Chart or Combo view only) Cursor to Waypoint To move cursor to a saved waypoint: Save Current Track Save Current Route Save Current Route To Save Current Route: Skip Next Waypoint Skip Next Waypoint Remove Target (only if a Target is Active) Remove Target NOTE: See Add a Waypoint Target or Trolling Grid for more information To Remove a Target: (Most recently-createdwaypoint) Waypoint [Name] Waypoint [Name] Submenu Go To Screen Snapshot X-PressTM Menu (Screen Snapshot View only) Delete Image Delete Image To delete an image: Sonar Menu Tab Sonar Menu Beam Select Beam Select To use Beam Select: Fish ID+TM Transducer Cone and Fish Arches To turn Fish ID+™ on or off: Fish ID Sensitivity To change the Fish ID Sensitivity setting: Zoom Width Zoom Width To change the Zoom Width Setting: 83 kHz Sensitivity To set the 83 kHz Sensitivity: To change the WideSide® Sensitivity setting: Depth Lines Depth Lines To change the Depth Lines setting: Surface Clutter To change the Surface Clutter setting: Noise Filter To change the Noise Filter setting: Max Depth To change the Max Depth setting: Water Type To change the Water Type setting: Transducer Select To change the selected Transducer: Navigation Menu Tab Navigation Menu Tab Current Track Current Track To view the Current Track Submenu: Current Track Submenu The Current Track Submenu contains the following menu choices: Waypoints To view the Waypoints Submenu: Waypoints Submenu The Waypoints Submenu contains the following menu choices: Edit Routes Routes To view the Routes Submenu: Routes Submenu The Routes Submenu contains the following menu choices: North Reference North Reference To change the North Reference setting: Grid Rotation To change the Grid Rotation setting: Track Min Distance To change the Track Minimum Distance setting: Map Datum To change the Map Datum setting: Course Projection Line To change the Course Project Line setting: Export All Nav Data To Export All Navigation Data: Delete All Nav Data Chart Menu Tab Chart Menu Chart Detail Level To change the Chart Detail Level setting: Map Borders Map Borders To change the Map Borders setting: Lat/Lon Grid Lat/Lon Grid To change the Lat/Lon Grid setting: Spot Soundings To change the Spot Soundings setting: Set Map Offset Set Map Offset Setup Menu Tab: User Mode To change the Map Offset setting: Clear Map Offset Alarms Menu Tab Alarms Menu Depth Alarm Depth Alarm To change the Depth Alarm setting: Fish ID Alarm To change the Fish ID Alarm setting: Low Battery Alarm To change the Low Battery Alarm setting: Temp Alarm To change the Temp Alarm setting: Off Course Alarm To change the Off Course Alarm setting: Arrival Alarm To change the Arrival Alarm setting: Drift Alarm Drift Alarm Perimeter To change the Drift Alarm setting: Alarm Tone Alarm Tone Setup Menu Tab Setup Menu Tab Units - Depth Units - Depth To change the Units - Depth setting: Units - Temp Models only Units - Speed To change the Units - Speed setting: User Mode User Mode To change the User Mode setting: Triplog Reset Triplog Reset To Reset Triplog: Restore Defaults Restore Defaults To Select Readouts: Depth Offset To change the Depth Offset setting: Temp Offset To change the Temp Offset setting: Speed Calibration Local Time Zone To change the Local Time Zone: Daylight Saving Time To change the Daylight Saving Time setting: Position Format To change the Position Format setting: Time Format To change the Time Format: Date Format NMEA Output NMEA Output Setup Menu Tab: User Mode To turn NMEA Output on or off: Sonar Views Menu Tab Views Menu To Change the View Status of Any View: Accessories Menu Tab Accessories Menu Tab (no accessories attached) (with accessories attached) Using Screen Snapshot To make a screen snapshot (Screen Snapshot must be enabled): To view screen snapshots: 700 Series™ Defaults to Simulator with a Transducer Attached Display Problems Problem Possible Cause Finding the Cause of Noise Finding the Cause of Noise Possible Source of Noise Isolation Other electronic devices The boat’s engine 700 Series™ Fishing System Accessories GPS Connection Cable: Wireless Sonar Link (WSL): www.humminbird.com Specifications Glossary Sonar Terms: Alarm, Depth: Alarm, Temperature: Beam (Sonar Beam): Decibel: dB Down Point: Display, FSTN: Feature Memory: Fish Symbol: Page Page Receiver: See Transmitter Receiver: Structure ID®: Grayscale Viewing Angle: Page GPS & Navigation Terms: Altitude: Cross Track Error (XTE): Track Distance To Go: Time to Go Speed Over Ground Present Position: Page Page Page Page Contact Humminbird® cservice@johnsonoutdoors.com Humminbird