Simulator, Shown with Optional
WeatherSense® Accessory

 

Start-Up Options Menu

 

Press the MENU key when the Title screen is displayed to

 

access the Start-Up Options menu.

 

Use the UP or DOWN 4-WAY Cursor keys to position the

 

cursor, then the RIGHT Cursor key to select one of the

 

following choices. If you wait too long, the system will

 

default to whichever menu mode happens to be highlighted:

 

• Normal

 

• Simulator

Start-Up Options Menu

• System Status

 

•PC Connect (use with PC Connect Cable).

See the following paragraphs for more information about each of these choices.

Normal Operation

Use Normal operation for on the water operation with a transducer connected. In addition, your 700 Series™ Fishing System uses advanced transducer detection methods to determine if a transducer is connected. If a functioning transducer is connected, Normal operation will be selected automatically at power up and your 700 Series™ Fishing System can be used on the water.

Exit Normal operation by powering your 700 Series™ Fishing System off.

Simulator

Use the Simulator to learn how to use your 700 Series™ Fishing System before taking your boat on the water. The Simulator is a very powerful tool that simulates on the water operation, providing a randomly-updated display. We recommend going through this manual while using the Simulator, since all of the menus function and affect the display the way they actually do when in Normal operation.

NOTE: To get the full benefit of the Simulator, it is important to select Simulator manually from the Start-Up Options menu as opposed to letting the 700 Series™ Fishing System enter Simulator automatically (as it will if a transducer is not

connected and you do nothing during power up). Manually selecting Simulator from the Start-Up Options menu allows you to pre-configure your 700 Series™ Fishing System for on the water operation. Any menu changes you make will be saved for later use.

36