Sonar X-PressTMMenu, Sonar Views Only | Humminbird 67 manual

Sonar X-PressTMMenu

(Sonar Views Only)

The Sonar X-PressTMmenu provides access to the settings most frequently-used. Press the MENU key once while in any of the Sonar Views to access the Sonar X-PressTMmenu.

NOTE: Menu choices will vary depending on system settings such as whether the unit is set for Advanced User mode or what transducer is currently selected.

Sonar X-PressTMMenu

WideSide View

(WideSide Transducer: WideSide View Only)

WideSide View sets which transducer beam from the WideSide Transducer is shown in the WideSide View. A WideSide transducer must be connected to the Matrix Fishing System. The WideSide View menu choice is available when Transducer Select is set to WideSide (see Sonar Menu Tab: Transducer Select) and can only be accessed from the Sonar X-PressTMmenu when you are in WideSide view.

NOTE: The WideSide View requires the purchase of the WideSide transducer. You can visit our website at www.humminbird.com to order this accessory online or contact our Customer Resource Center at 1-334-687-0503.

To adjust the WideSide View:

1.Make sure you are in WideSide Transducer Mode and that a WideSide transducer is connected, then highlight WideSide View on the Sonar X-PressTMmenu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the WideSide View setting. (L [Left], Both, R [Right], Default = Both)

34

Image 40

Humminbird 67 manual Sonar X-PressTMMenu, Sonar Views Only, To adjust the WideSide View

Contents

Matrix 67GPS Trackplotter Operations Manual Thank You Table of Contents Navigation X-Press Menu Navigation Views Only Sonar X-Press Menu Sonar Views OnlySonar Menu Tab Setup Menu Tab Alarms Menu TabNavigation Menu Tab Accessories Menu Tab Troubleshooting DualBeam Plus Sonar How Sonar WorksQuadraBeam Sonar How GPS and Cartography Work WideSide SonarWith Optional-Purchase WideSide Transducer Multi-Media Card MMC Detailed Map What’s On the Sonar Display Bait Ball Hard Bottom Rocky Bottom 83 kHz, Wide Beam Hollow Fish Symbol To your boat, including the following items Views Sonar viewsSonar View Zoom View Sonar View Sonar View Understanding Sonar History Real Time Sonar RTS Window Bottom Presentation Bottom Contour Profile with RTS WindowPage Sonar Zoom View Sonar Zoom View 200/83 kHz Split Sonar View Big Digits View200/83 kHz Split Sonar View Big Digits View Side Beam View Side Beam View WideSide View WideSide View Bird’s Eye View Bird’s Eye View Chart View Chart View with Active Cursor Combo View View OrientationViewing Cartography Combo ViewPage Waypoints, Routes and Tracks Introduction to NavigationWaypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Chart View with Grid Add a Waypoint Target or Trolling Grid Save, Edit or Delete a Route Save or Clear a Current Track Edit, Delete or Hide Saved Tracks POWER/LIGHT Key Key FunctionsView Key Info Key WAY Cursor Control Key Menu KeyMark Key Zoom +/- Key Goto KeyExit Key Powering Up the Unit Accessory BusMatrix 67 Title Screen Main Menu System Normal User Mode Menu System Sonar Tab, Normal Mode Sonar Tab, Advanced Mode Normal Operation Start-Up Options MenuSimulator Self Test Accessory Test GPS Diagnostic View Accessory Test ScreenSystem Status System Status Self Test Screen PC Connect GPS Diagnostic ViewWith PC Connect Cable Only To adjust the WideSide View Sonar X-PressTMMenuSonar Views Only Sonar X-PressTMMenu To adjust the Sensitivity SensitivityHighlight Sensitivity on the Sonar X-PressTMmenu Sensitivity at Low Sensitivity at Medium To adjust the Upper Range Upper Range Lower Range To adjust the Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu Chart Speed To adjust the Side Beam RangeTo adjust the Chart Speed Highlight Chart Speed on the Sonar X-Press menu To adjust the Bottom View To adjust the Zoom LevelBottom View Zoom Level Save Current Track Navigation X-PressTMMenuClear Current Track Save Current Route Cancel NavigationSkip Next Waypoint Remove Grid Remove TargetSonar Window Sonar Menu Tab Sonar Menu To use Beam Select Beam SelectHighlight Beam Select on the Sonar main menu To turn Fish ID+TM on or off Fish ID+TMTransducer Cone and Fish Arches Fish Sensitivity KHz Sensitivity KHz Balance WideSide Sensitivity Depth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter To change the Noise Filter setting To change the Max Depth settingNoise Filter Max Depth To change the Water Type setting Water TypeTransducer Select To change the selected Transducer Navigation Menu Tab Tracks Tracks allows you to view the Tracks submenuTo view the Tracks Submenu Highlight Tracks on the Navigation main menu Waypoints To view the Waypoints SubmenuHighlight Waypoints on the Navigation main menu Waypoints Submenu contains the following menu choices To change the View Orientation setting RoutesTo view the Routes Submenu Routes Submenu contains the following menu choices Chart Detail Level To change the Chart Detail Level settingTo change the Map Borders setting Map Borders Lat/Lon Grid Spot SoundingsNorth Reference Grid Rotation To change the Trackpoint Interval setting To change the Track Minimum Distance settingTrackpoint Interval Track Min Distance Set Simulation Position Map DatumSet Map Offset Clear Map Offset Delete All Nav DataTo Clear Map Offset To Delete All Navigation Data From any view, press the Menu key twice to access the Main Alarms Menu TabAlarms Menu Depth Alarm Fish ID AlarmTo change the Depth Alarm setting To change the Fish ID Alarm setting Low Battery Alarm Off Course AlarmTo change the Low Battery Alarm setting Highlight Low Battery Alarm on the Alarms main menu Drift Alarm Arrival AlarmAlarm Tone Setup Menu Tab Setup Menu Tab Units Temp Units DepthUnits Distance Units Speed User ModeLanguage Triplog Reset Restore DefaultsTo Reset Triplog To Restore Defaults To Select Views Select ViewsSelect Views Advanced, Sonar View Only Select ReadoutsTo Select Readouts Temp Offset Depth OffsetSpeed Calibration Daylight Savings Time Local Time ZonePosition Format Time Format Date FormatAdvanced, International Only To change the Time Format Nmea Output SonarFollowing Nmea sentences are output To turn Nmea Output on or off Accessories Menu Tab Accessories Menu Tab Troubleshooting Fishing System Doesn’t Power Up Display Problems Problem Possible Cause Finding the Cause of Noise Possible Source of Noise Isolation Matrix Fishing System Accessories Specifications Page Custserv@techsonic.com Monday Friday 800 a.m. to 430 p.m. Central Standard Time