Key Functions, POWER/LIGHT Key, View Key, Info Key | Humminbird 67

Key Functions

Your Matrix Fishing System user interface consists of a set of easy-to-use keys that work with various on-screen views and menus to give you flexibility and control over your fishing experience.

POWER/LIGHT Key

The POWER/LIGHT key is used to turn the Matrix Fishing System on and off, and also to adjust the backlight and contrast of the display. Press the POWER/LIGHT key to turn the unit on. The Title screen is then displayed until the Matrix Fishing System begins sonar operation.

Your Matrix Fishing System will start up with the backlight on and will automatically turn it off to conserve power. To turn the backlight on for night fishing, or to adjust the display contrast, press the POWER/LIGHT key to access the Light and Contrast menu. Use the 4-WAY Cursor key to select

Light or Contrast and then use the LEFT or RIGHT Cursor key to change the settings. Press EXIT to exit the Light and Contrast menu.

Press and hold the POWER/LIGHT key for 3 seconds to turn the unit off. A message will appear telling you how many seconds there are until shutdown occurs. Your Matrix Fishing System should always be turned off using the POWER/LIGHT key. This will ensure that shutdown occurs properly and any menu settings will be saved.

VIEW Key

The VIEW key is used to cycle through all available views. Press the VIEW key to advance to the next view. Repeatedly pressing VIEW cycles through all views available. Views can be hidden to optimize the system to your fishing requirements (see Setup Menu Tab: Select Views, Advanced).

INFO Key

Info - Press the INFO key while in Bird's Eye, Chart or Combo View to display information about objects that are nearest to an active cursor.

If the cursor is not active, the following menu will be displayed. Use the 4-WAY

Cursor key to select Nearest Port, Nearest Tide Station or Nearest Current

Station, then use the RIGHT Cursor key to display the requested information.

NOTE: The built-in UniMap™ does not contain Port, Tide or Current information.

This information is only available from optional purchase MMC cards.

25

Image 31

Humminbird 67 manual Key Functions, POWER/LIGHT Key, View Key, Info Key

Contents

Matrix 67GPS Trackplotter Operations Manual Thank You Table of Contents Navigation X-Press Menu Navigation Views Only Sonar X-Press Menu Sonar Views OnlySonar Menu Tab Setup Menu Tab Alarms Menu TabNavigation Menu Tab Accessories Menu Tab Troubleshooting DualBeam Plus Sonar How Sonar WorksQuadraBeam Sonar How GPS and Cartography Work WideSide SonarWith Optional-Purchase WideSide Transducer Detailed Map Multi-Media Card MMC Bait Ball Hard Bottom Rocky Bottom What’s On the Sonar Display To your boat, including the following items 83 kHz, Wide Beam Hollow Fish Symbol Zoom View ViewsSonar views Sonar View Sonar View Sonar View Real Time Sonar RTS Window Understanding Sonar History Bottom Contour Profile with RTS Window Bottom PresentationPage Sonar Zoom View Sonar Zoom View Big Digits View 200/83 kHz Split Sonar ViewBig Digits View 200/83 kHz Split Sonar View Side Beam View Side Beam View WideSide View WideSide View Bird’s Eye View Bird’s Eye View Chart View with Active Cursor Chart View Combo View Combo ViewView Orientation Viewing CartographyPage Waypoints, Routes and Tracks Introduction to NavigationWaypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Chart View with Grid Save, Edit or Delete a Route Edit, Delete or Hide Saved Tracks Save or Clear a Current Track Info Key POWER/LIGHT KeyKey Functions View Key WAY Cursor Control Key Menu KeyMark Key Zoom +/- Key Goto KeyExit Key Powering Up the Unit Accessory BusMatrix 67 Title Screen Menu System Main Menu System Normal User Mode Sonar Tab, Normal Mode Sonar Tab, Advanced Mode Normal Operation Start-Up Options MenuSimulator System Status Self Test Screen Self Test Accessory Test GPS Diagnostic ViewAccessory Test Screen System Status PC Connect GPS Diagnostic ViewWith PC Connect Cable Only Sonar X-PressTMMenu To adjust the WideSide ViewSonar X-PressTMMenu Sonar Views Only Sensitivity at Low Sensitivity at Medium To adjust the SensitivitySensitivity Highlight Sensitivity on the Sonar X-PressTMmenu Upper Range To adjust the Upper Range Lower Range To adjust the Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu Highlight Chart Speed on the Sonar X-Press menu Chart SpeedTo adjust the Side Beam Range To adjust the Chart Speed Zoom Level To adjust the Bottom ViewTo adjust the Zoom Level Bottom View Save Current Track Navigation X-PressTMMenuClear Current Track Save Current Route Cancel NavigationSkip Next Waypoint Remove Grid Remove TargetSonar Window Sonar Menu Sonar Menu Tab To use Beam Select Beam SelectHighlight Beam Select on the Sonar main menu To turn Fish ID+TM on or off Fish ID+TMTransducer Cone and Fish Arches KHz Sensitivity Fish Sensitivity WideSide Sensitivity KHz Balance Depth Lines To change the Depth Lines settingDepth Lines Surface Clutter To change the Surface Clutter settingSurface Clutter Max Depth To change the Noise Filter settingTo change the Max Depth setting Noise Filter To change the selected Transducer To change the Water Type settingWater Type Transducer Select Navigation Menu Tab Highlight Tracks on the Navigation main menu TracksTracks allows you to view the Tracks submenu To view the Tracks Submenu Waypoints Submenu contains the following menu choices WaypointsTo view the Waypoints Submenu Highlight Waypoints on the Navigation main menu Routes Submenu contains the following menu choices To change the View Orientation settingRoutes To view the Routes Submenu Map Borders Chart Detail LevelTo change the Chart Detail Level setting To change the Map Borders setting Grid Rotation Lat/Lon GridSpot Soundings North Reference Track Min Distance To change the Trackpoint Interval settingTo change the Track Minimum Distance setting Trackpoint Interval Set Simulation Position Map DatumSet Map Offset To Delete All Navigation Data Clear Map OffsetDelete All Nav Data To Clear Map Offset From any view, press the Menu key twice to access the Main Alarms Menu TabAlarms Menu To change the Fish ID Alarm setting Depth AlarmFish ID Alarm To change the Depth Alarm setting Highlight Low Battery Alarm on the Alarms main menu Low Battery AlarmOff Course Alarm To change the Low Battery Alarm setting Drift Alarm Arrival AlarmAlarm Tone Setup Menu Tab Setup Menu Tab Units Temp Units DepthUnits Distance Units Speed User ModeLanguage To Restore Defaults Triplog ResetRestore Defaults To Reset Triplog To Select Views Select ViewsSelect Views Advanced, Sonar View Only Select ReadoutsTo Select Readouts Temp Offset Depth OffsetSpeed Calibration Daylight Savings Time Local Time ZonePosition Format To change the Time Format Time FormatDate Format Advanced, International Only To turn Nmea Output on or off Nmea OutputSonar Following Nmea sentences are output Accessories Menu Tab Accessories Menu Tab Fishing System Doesn’t Power Up Troubleshooting Problem Possible Cause Display Problems Possible Source of Noise Isolation Finding the Cause of Noise Matrix Fishing System Accessories Specifications Page Monday Friday 800 a.m. to 430 p.m. Central Standard Time Custserv@techsonic.com