Yamaha RX-V559 owner manual 8Cursor buttons u / d / j / i, ENTER, Notes

8Cursor buttons u / d / j / i, ENTER

Select and adjust the sound field program parameters or the “SET MENU” parameters.

9RETURN

Returns to the previous menu level when adjusting the “SET MENU” parameters.

0TRANSMIT indicator

Flashes while the remote control is sending infrared signals.

ASTANDBY

Sets this unit to the standby mode (see page 27).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

BPOWER

Turns on this unit (see page 27).

Note

This button is operational only when MASTER ON/OFF on the front panel is pressed inward to the ON position.

CSLEEP

Sets the sleep timer (see page 34).

DMULTI CH IN

Selects the component connected to the MULTI CH INPUT jacks as the input source when using an external decoder, etc. (see page 37).

EVOLUME +/–

Increases or decreases the volume level.

CONTROLS AND FUNCTIONS

FComponent selector switch

Selects the operation mode of the remote control buttons in the shaded area.

AMP

Operates this unit.

SOURCE

Operates the component selected with an input selector button (see page 91).

TV

Operates the TV assigned to either DTV/CBL or (see page 90).

Notes

•To set the remote control codes for other components, see page 92.

•When you set the remote control codes for both DTV/CBL and

(see page 92), priority is given to the one set for DTV/ CBL.

GMUTE

Mutes the audio output. Press again to restore the audio output to the previous volume level (see page 33).

HSTRAIGHT (EFFECT)

Turns the sound field programs off or on. When the “STRAIGHT” mode is selected, 2-channel or multi- channel input signals are output directly from their respective speakers without effect processing (see page 38).

INIGHT

Turns on or off the night listening modes (see page 33).

JSET MENU

Enters “SET MENU” (see page 77).

KDISPLAY

Selects the on-screen display (OSD) mode for your video monitor (see page 40).

INTRODUCTION

7