Yamaha RX-V559 Using Video Features, Displaying the input source information, Set Menu

USING VIDEO FEATURES

Displaying the input source information

You can display the format, sampling frequency, channel, bit rate and flag data of the current input signal.

1Set the component selector switch to AMP and then press SET MENU on the remote control.

The top “SET MENU” display appears in the OSD.

AMP

SET MENU

SOURCE

MENU

TV SRCH MODE

SET MENU

.;BASIC ;MANUAL

.;SIGNAL INFO

p p

2Press d repeatedly to select “SIGNAL INFO” and then press ENTER.

The following information about the input source appears in the OSD.

PRESET/CH			PRESET/CH
ENTER			ENTER
A-E/CAT.	A-E/CAT.	A-E/CAT.	A-E/CAT.

Signal format FORMAT

Signal format display. When this unit cannot detect a digital signal, it automatically switches to analog input.

Display status: Analog, Digital, Dolby D, DTS, PCM,

---

Note

“---” appears when this unit cannot detect any signals.

Sampling frequency SAMPLING

The number of samples per second taken from a continuous signal to make a discrete signal. Display status: 32kHz, 44.1kHz, 48kHz, 64kHz,

88.2kHz, 96kHz, ---

Note

“---” appears when this unit cannot detect the sampling frequency.

Channel CHANNEL

The number of source channels in the input signal (front/surround/LFE). For example, a multi-channel soundtrack with 3 front channels, 2 surround channels and LFE, is displayed as “3/2/0.1”.

Note

“---” appears when there is no source channel available.

Bit rate BITRATE

The number of bits passing a given point per second.

Note

“---” appears when this unit cannot detect the bit rate.

Flag FLAG

Flag data encoded in DTS, Dolby Digital, or PCM signals that cue this unit to automatically switch decoders.

OPERATION BASIC

;SIGNAL INFO		3 Press SET MENU on the remote control again
		to exit from “SET MENU”.
FORMAT	PCM
---		SET MENU
NONE		MENU

SRCH MODE

39