Yamaha RX-V559 Press j / i to select the desired setting, Press SET Menu to exit from Basic Setup

BASIC SETUP

10Press j / i to select the desired setting.

	PRESET/CH	;BASIC SETUP
			S >M L
		;;;;YES
	ENTER	;;;;6spk
		SETUP:>OK CANCEL
A-E/CAT.	A-E/CAT.	.;;;;YES
		p	p

Choices: YES, NO

•Select “YES” to complete the setup procedure if the test tone levels from each speaker were satisfactory.

•Select “NO” to proceed to the speaker level adjustment menu in step 12 to balance the output level of each speaker.

11Press ENTER to confirm your selection.

PRESET/CH

ENTER

A-E/CAT.A-E/CAT.

•If you selected “YES” in step 10, the setup procedure is completed and the display returns to the top “SET MENU” display.

•If you selected “NO” in step 10, the front speaker level adjustment display appears in the front panel display.

12Press u/ d to select a speaker and then j / i to adjust the balance.

The selected speaker and the front left speaker (or the surround left speaker) output a test tone in turn.

•Press i to increase the value.

•Press j to decrease the value.

PRESET/CH

;BASIC SETUP

. FR;;;;;;;;;;

C;;;;;;;;;;

ENTER SL;;;;;;;;;;

SB;;;;;;;;;;

A-E/CAT.A-E/CAT.SR;;;;;;;;;;

SWFR;;;;;;;;;;

p p

•Select “FR” to adjust the balance between the front left and right speakers.

•Select “C” to adjust the balance between the front left and center speakers.

•Select “SL” to adjust the balance between the front left and surround left speakers.

•Select “SB” to adjust the balance between the surround left and surround back speakers.

•Select “SR” to adjust the balance between the surround left and surround right speakers.

•Select “SWFR” to adjust the balance between the front left speaker and the subwoofer.

13Press SET MENU to exit from “BASIC SETUP”.

SET MENU

MENU

SRCH MODE

30