Yamaha RX-V559 Connecting a DVD player, Notes, Audio out, Component video out, Videoout

CONNECTIONS

Connecting a DVD player, a DVD recorder, a VCR or an STB

Connect your DVD player, DVD recorder, VCR or STB (set-top box) using the same type of video connections as those made for your TV (see page 18). The cable TV receiver and the satellite receiver are examples of the STB.

CAUTION

Do not connect this unit or other components to the AC power supply until all connections between components are complete.

Notes

•When “VIDEO CONV.” is set to “OFF” (see page 85), be sure to make the same type of video connections as those made for your TV (see page 18). For example, if you connected your TV to the VIDEO MONITOR OUT jack of this unit, connect your other components to the VIDEO jacks.

•When “VIDEO CONV.” is set to “ON” (see page 85), the converted video signals are output only at the MONITOR OUT jacks. When recording a source, you must make the same type of video connections between each component.

•To make a digital connection to a component other than the default component assigned to each DIGITAL INPUT or DIGITAL OUTPUT jack, select the corresponding setting for “OPTICAL OUT”, “OPTICAL IN”, or “COAXIAL IN” in “I/O ASSIGNMENT” (see page 83).

•If you connect your DVD player to both the DIGITAL INPUT (OPTICAL) and the DIGITAL INPUT (COAXIAL) jacks, priority is given to the signals input at the DIGITAL INPUT (COAXIAL) jack.

■Connecting a DVD player

			DVD player
Audio out				Component video out
	Videoout	video-S out	out		out
R L			Opticalaudio	C	Coaxialaudio		(U.S.A. model)
	V	S	O		Y	PB	PR
AUDIO			DIGITAL INPUT
			DVD	DVD
							COMPONENT VIDEO
							DVD
						Y	PBPR
			OPTICAL	COAXIAL
DVD		DVD
VIDEO		S VIDEO

PREPARATION

19