Yamaha RX-V559 owner manual 8TUNING MODE AUTO/MAN’L, Notes

8TUNING MODE (AUTO/MAN’L)

Switches between automatic tuning (the AUTO indicator is turned on) and manual tuning (the AUTO indicator is turned off) (see page 45).

9ZONE 2 ON/OFF

Turns on Zone 2 or sets it to the standby mode (see page 96).

Note

This button is operational only when MASTER ON/OFF is pressed inward to the ON position.

0ZONE CONTROL

Switches the zone you want to control between the main zone and Zone 2 (see page 96).

y

When Zone 2 is selected, the ZONE2 indicator flashes in the front panel display for approximately 5 seconds. While the indicator is flashing, perform the desired operation.

AVOLUME

Controls the output level of all audio channels.

y

This does not affect the AUDIO OUT (REC) level.

B PHONES (SILENT CINEMA) jack

Outputs audio signals for private listening with headphones (see page 33).

Notes

•When you connect headphones, no signals are output at the SUBWOOFER OUTPUT jack or the speaker terminals.

•All Dolby Digital and DTS audio signals are mixed down to the left and right headphone channels.

CSPEAKERS A/B

Turns on or off the set of front speakers connected to the FRONT A and/or B terminals on the rear panel each time the corresponding button is pressed.

DPRESET/TUNING, EDIT

•Switches the function of PRESET/TUNING/CH l / h between selecting preset station numbers and selecting the tuning frequency.

•Edits the assignments of preset stations (see page 50).

CONTROLS AND FUNCTIONS

ESTRAIGHT (EFFECT)

Turns the sound field programs off or on. When the “STRAIGHT” mode is selected, 2-channel or multi- channel input signals are output directly from their respective speakers without effect processing (see page 38).

FFM/AM

Switches the reception band between FM and AM when “TUNER” is selected as the input source (see page 45).

GPROGRAM selector

Selects sound field programs or adjusts the bass/treble balance in conjunction with TONE CONTROL (see page 32).

HTONE CONTROL

Adjusts the bass/treble balance of the front left and right speakers in conjunction with the PROGRAM selector (see page 32).

IINPUT MODE

Selects either digital or analog input signals exclusively or sets this unit to automatically detect the type of input signals and select the corresponding input signals when one component is connected via both digital and analog connections (see page 34).

JINPUT selector

Selects the desired input source.

KMULTI CH INPUT

Selects the component connected to the MULTI CH INPUT jacks as the input source (see page 37).

Note

The input source connected to the MULTI CH INPUT jacks takes priority over the source selected with the INPUT selector on the front panel (or the input selector buttons on the remote control).

LVIDEO AUX jacks

Input audio and video signals from a portable external source such as a game console, a video camera or a portable audio player (see page 23).

y

To reproduce the source signals input at these jacks, select “V-AUX” as the input source.

Notes

•The audio signals input at the PORTABLE mini jack take priority over the ones input at the AUDIO L/R jacks.

•The audio signals input at the DOCK terminal on the rear panel take priority over the ones input at the VIDEO AUX jacks.

INTRODUCTION

5