Low Battery Alarm, Off Course Alarm | Humminbird 67 guide

Low Battery Alarm

Low Battery Alarm sounds when the input battery voltage is equal to or less than the menu setting. The battery alarm will only sound for the battery that is connected to the Matrix Fishing System. The Low Battery Alarm should be set to warn you when the battery voltage drops below the safety margin that you have determined. For instance, if you are running a trolling motor (battery operated), you would want to set the Low Battery Alarm to sound before the battery voltage drops too low for it to be used to start your main, gasoline-powered engine.

To change the Low Battery Alarm setting:

1.Highlight Low Battery Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Low Battery Alarm setting. (Off, 8.5V - 13.5V, Default = Off)

Off Course Alarm

Off Course Alarm sounds when the boat has moved too far off course based on the menu setting when navigating. Off Course Alarm allows you to set how far the boat is allowed to move off course before the Off Course Alarm will sound.

Off Course Limits

To change the Off Course Alarm setting:

1.Highlight Off Course Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Off Course Alarm setting. (Off, 30 to 3000 feet, 10 to 1000 meters [International Models Only], Default = 300 ft, 100 m)

Arrival Alarm Circle

63

Image 69

Humminbird 67 manual To change the Low Battery Alarm setting, To change the Off Course Alarm setting

Contents

Matrix 67GPS Trackplotter Operations Manual Thank You Table of Contents Sonar X-Press Menu Sonar Views Only Navigation X-Press Menu Navigation Views OnlySonar Menu Tab Alarms Menu Tab Setup Menu TabNavigation Menu Tab Accessories Menu Tab Troubleshooting How Sonar Works DualBeam Plus SonarQuadraBeam Sonar WideSide Sonar How GPS and Cartography WorkWith Optional-Purchase WideSide Transducer Detailed Map Multi-Media Card MMC Bait Ball Hard Bottom Rocky Bottom What’s On the Sonar Display To your boat, including the following items 83 kHz, Wide Beam Hollow Fish Symbol Sonar views ViewsSonar View Zoom View Sonar View Sonar View Real Time Sonar RTS Window Understanding Sonar History Bottom Contour Profile with RTS Window Bottom PresentationPage Sonar Zoom View Sonar Zoom View Big Digits View 200/83 kHz Split Sonar View200/83 kHz Split Sonar View Big Digits View Side Beam View Side Beam View WideSide View WideSide View Bird’s Eye View Bird’s Eye View Chart View with Active Cursor Chart View View Orientation Combo ViewViewing Cartography Combo ViewPage Introduction to Navigation Waypoints, Routes and TracksWaypoints, Routes and Tracks Save, Edit, or Delete a Waypoint Navigate to a Waypoint or Position Add a Waypoint Target or Trolling Grid Chart View with Grid Save, Edit or Delete a Route Edit, Delete or Hide Saved Tracks Save or Clear a Current Track Key Functions POWER/LIGHT KeyView Key Info Key Menu Key WAY Cursor Control KeyMark Key Goto Key Zoom +/- KeyExit Key Accessory Bus Powering Up the UnitMatrix 67 Title Screen Menu System Main Menu System Normal User Mode Sonar Tab, Normal Mode Sonar Tab, Advanced Mode Start-Up Options Menu Normal OperationSimulator Accessory Test Screen Self Test Accessory Test GPS Diagnostic ViewSystem Status System Status Self Test Screen GPS Diagnostic View PC ConnectWith PC Connect Cable Only Sonar X-PressTMMenu To adjust the WideSide ViewSonar Views Only Sonar X-PressTMMenu Sensitivity To adjust the SensitivityHighlight Sensitivity on the Sonar X-PressTMmenu Sensitivity at Low Sensitivity at Medium Upper Range To adjust the Upper Range To adjust the Lower Range Lower RangeHighlight Lower Range on the Sonar X-PressTMmenu To adjust the Side Beam Range Chart SpeedTo adjust the Chart Speed Highlight Chart Speed on the Sonar X-Press menu To adjust the Zoom Level To adjust the Bottom ViewBottom View Zoom Level Navigation X-PressTMMenu Save Current TrackClear Current Track Cancel Navigation Save Current RouteSkip Next Waypoint Remove Target Remove GridSonar Window Sonar Menu Sonar Menu Tab Beam Select To use Beam SelectHighlight Beam Select on the Sonar main menu Fish ID+TM To turn Fish ID+TM on or offTransducer Cone and Fish Arches KHz Sensitivity Fish Sensitivity WideSide Sensitivity KHz Balance To change the Depth Lines setting Depth LinesDepth Lines To change the Surface Clutter setting Surface ClutterSurface Clutter To change the Max Depth setting To change the Noise Filter settingNoise Filter Max Depth Water Type To change the Water Type settingTransducer Select To change the selected Transducer Navigation Menu Tab Tracks allows you to view the Tracks submenu TracksTo view the Tracks Submenu Highlight Tracks on the Navigation main menu To view the Waypoints Submenu WaypointsHighlight Waypoints on the Navigation main menu Waypoints Submenu contains the following menu choices Routes To change the View Orientation settingTo view the Routes Submenu Routes Submenu contains the following menu choices To change the Chart Detail Level setting Chart Detail LevelTo change the Map Borders setting Map Borders Spot Soundings Lat/Lon GridNorth Reference Grid Rotation To change the Track Minimum Distance setting To change the Trackpoint Interval settingTrackpoint Interval Track Min Distance Map Datum Set Simulation PositionSet Map Offset Delete All Nav Data Clear Map OffsetTo Clear Map Offset To Delete All Navigation Data Alarms Menu Tab From any view, press the Menu key twice to access the MainAlarms Menu Fish ID Alarm Depth AlarmTo change the Depth Alarm setting To change the Fish ID Alarm setting Off Course Alarm Low Battery AlarmTo change the Low Battery Alarm setting Highlight Low Battery Alarm on the Alarms main menu Arrival Alarm Drift AlarmAlarm Tone Setup Menu Tab Setup Menu Tab Units Depth Units TempUnits Distance User Mode Units SpeedLanguage Restore Defaults Triplog ResetTo Reset Triplog To Restore Defaults Select Views To Select ViewsSelect Views Select Readouts Advanced, Sonar View OnlyTo Select Readouts Depth Offset Temp OffsetSpeed Calibration Local Time Zone Daylight Savings TimePosition Format Date Format Time FormatAdvanced, International Only To change the Time Format Sonar Nmea OutputFollowing Nmea sentences are output To turn Nmea Output on or off Accessories Menu Tab Accessories Menu Tab Fishing System Doesn’t Power Up Troubleshooting Problem Possible Cause Display Problems Possible Source of Noise Isolation Finding the Cause of Noise Matrix Fishing System Accessories Specifications Page Monday Friday 800 a.m. to 430 p.m. Central Standard Time Custserv@techsonic.com