![](/images/new-backgrounds/1328769/32876971x1.webp)
Water Type
(Advanced)
Water Type configures your unit for operation in fresh or salt water. The Water Type menu choice is available when User Mode is set to Advanced (see Setup Menu Tab: User Mode).
NOTE: In salt water, what would be considered a large fish might be 2 to 10 times bigger than a large fish in fresh water (depending on the type of fish you are seeking). The salt water setting allows for a greater range in fish size adjustment to account for this. Also, make sure that the Water Type is set accurately, especially in salt water, as this affects the accuracy of deep water depth readings.
To change the Water Type setting:
1.Make sure you are in Advanced User Mode, then highlight Water Type on the Sonar main menu.
2.Use the LEFT or RIGHT
Transducer Select
Transducer Select allows you to select which transducer you want to use (the 700 Series™ Fishing System comes with a DualBeam PLUS™ QuadraBeam™ transducer, and also supports the
To change the selected Transducer: | Navigation Menu Tab |
1.Highlight Transducer Select on the Sonar Main menu.
2.Use the LEFT or RIGHT
Navigation Menu Tab
(with optional-purchase GPS receiver)
Press the MENU key twice to access the Main Menu System, then press the RIGHT cursor key to select the Navigation tab.
NOTE: The Navigation menu tab will only appear if you have an
NOTE: Menu choices will vary depending on system settings.
63 | 64 |