2

Unit Switch

4.Insert the threaded shaft of the switch through the hole and hold it in place with one hand, making sure that the pivot of the switch is aligned with the words "Unit 1" and "Unit 2".

5.Push the rubber boot over the top of the switch and tighten onto the shaft.

6.Fully tighten the nut using an adjustablewrench.

CAUTION: Use care when tightening the nut to avoid damaging the rubber boot.

3.Connecting the Control Heads to the Switch and the Transducer

1.Connect the transducer and the Control Heads to the Unit Switch, referring to the illustration for guidance.

Connecting the Control Heads to the Switch and the Transducer

Unit 1 Unit 2

 

US2 W Switch

Cable Connector

Cable Connector

Control head

 

 

 

 

 

Control head

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Route connector to the transducer

2.Remove the connector holder from your control heads and insert the cable connector from the Unit Switch into the connector holder.

CAUTION: The slot for the connector is keyed to prevent reversed installation, so do not force the connector into the holder. See the Installation section of your operations manual for additional information.

4.Connecting the Cables

CAUTION! Do not cut or shorten the transducer cable, and try not to damage the cable insulation. Route the cable as far as possible from any VHF radio antenna cables or tachometer cables to reduce the possibility of interference. If the cable is too short, extension cables are available to extend the transducer cable up to a total of 50'. For assistance, contact the Customer Resource Center at www.humminbird.com or call 1-800-633-1468for more information.

1.Insert the Unit Switch cable connectors into the appropriateslots of the connector holder on each control head. The cable connectors are labeled,and there are correspondinglabels on the connector holder on the rear of each control head. The slots are keyed to prevent reversed installation, so be careful not to force the connector into the holder.

Your control heads are now ready for operation.

530718-1_B

Insert the Cable Connector

Unit Switch

Cable Connector

© 2007 Humminbird®, Eufaula AL, USA. All rights reserved.

Page 2
Image 2
Humminbird Fishing Equipment warranty Connecting the Cables

Fishing Equipment specifications

Humminbird Fishing Equipment is at the forefront of recreational fishing technology, offering a range of products designed to enhance the angling experience for both novice and seasoned fishers. Known for their innovation and high-quality craftsmanship, Humminbird has positioned itself as a trusted name in the fishing community.

One of the standout features of Humminbird equipment is its array of fish finders, which utilize advanced sonar technology to locate fish with precision. The CHIRP (Compressed High-Intensity Radiated Pulse) sonar system, for instance, provides a broader frequency range, allowing for more accurate depth detailing and separation of bait fish from game fish. This technology enables anglers to make informed decisions on where to cast their lines, significantly increasing the chances of a successful catch.

Another innovative feature is the MEGA Imaging technology. This allows users to see underwater structures and fish with unprecedented clarity, offering a detailed view up to 125 feet below the boat. MEGA Down Imaging provides ultra-clear images of what lies beneath, while MEGA Side Imaging reveals the underwater landscape up to 200 feet on either side of the boat, making it easier than ever to find the best fishing spots.

Humminbird's SmartStrike feature offers yet another layer of support for anglers. This intelligent technology analyzes various data sets, like water temperature and weather conditions, to suggest the best locations and times for fishing specific species. It takes the guesswork out of planning a fishing trip and helps maximize the likelihood of success.

In addition to their cutting-edge sonar capabilities, Humminbird products feature user-friendly interfaces, allowing anglers to customize their displays according to their preferences. The high-resolution color screens offer easy readability in bright sunlight, while touch-screen functionalities make navigation simple and intuitive.

Durability is another hallmark of Humminbird equipment. Built to withstand harsh marine environments, their fish finders and related accessories are designed with rugged materials and weather-resistant casings. This ensures reliability in the field, even in inclement weather conditions.

In conclusion, Humminbird Fishing Equipment combines innovative technology, user-centric design, and durability to elevate the fishing experience. Whether you're a casual angler or a serious fisherman, Humminbird's range of products equips you with the tools necessary to enhance your time on the water. With features like CHIRP sonar, MEGA Imaging, and SmartStrike, anglers can enjoy an efficient, successful, and enjoyable fishing journey.