Humminbird Wide 2000 guide

fuse in the connection. If you must wire the control head directly to a battery, be sure to install an inline fuse holder

Image 14

Humminbird Wide 2000 manual

Contents

Page Parts Supplied AccessoriesInstallation Overview Determining How to Mount the Transducer Trolling Motor Mounting Alternate Transducers and Mounting MethodsPortable Mounting Thru-Hull Mounting Beginning Installation Transducer Exchange Transom Installation Step One Determine Where to Mount the Transducer Step Two Drill the Mounting Holes Step Three Assemble the Transducer Confirm the pivot angle has not changed Step Five Adjust the Running Position of the TransducerStep Four Mount the Transducer to the Transom Step Six Route the Cable Step Two Test the Mounting Location Inside the Hull InstallationStep One Determine the Mounting Location Page Step Three Permanently Mount the Transducer Step Two Connect the Power Cable to the Boat Control Head InstallationStep One Determine Where to Mount Page Step Three Drill the Mounting Holes Step Four Run the CablesPage Step Five Assembling the Connector Holder Your Humminbird is now ready for operation Test the Installation Testing the Installation Using the Wide Simulator Operation Feature Memory Interpreting the ON-SCREEN Information Page Page Control Functions Page Sensitivity Depth Range Page Zoom Depth Alarm Fish Alarm Triplog Page Page Page Page Using Diagnostic Customizing SET-UP FunctionsPage Using Alternative Transducers Specifications