PLEASE READ THESE INSTRUCTIONS CAREFULLY
It is important that your stove is correctly installed and operated, as Hunter Stoves Limited cannot accept responsibility for any fault arising from incorrect installation of this product.
IMPORTANT POINTS FOR THE USER
1.Read all instructions carefully before attempting to operate this appliance.
2.If you have any doubts about the suitability of your chimney for the appliance please consult your local Hunter Stoves stockist/dealer. The chimney must be given a precautionary sweep before connection to the appliance.
3.It is required by law that any appliance using gas is installed by a CORGI registered fitter in conjunction with these instructions and in accordance with the rules in force.
4.Fires can be dangerous, always use a fireguard in the presence of children, the elderly or the infirmed.
5.All outer surfaces of the appliance are considered to be working surfaces except for the gas control knob and valve cover flap.
6.It should be noted that heat given off from this appliance might affect articles placed close to it. Curtains should not be positioned above the appliance or within 300mm of the sides. Caution should also be taken sighting the appliance near to ‘embossed’ type wallpapers.
7.Although the appliance is referred to as a stove it is clearly not designed as a ‘cooker’ or a ‘dryer’. It only has designated CE approval for use as a room heater with a decorative fuel effect.
8.Never attempt to light the appliance if the glass panel is damaged.
9.Never use this appliance with the door open or removed.
NOTE:
During the first few uses, the appliance may emit an unpleasant odour. This is the paint curing. It is
The CORGI REGISTERED ENGINEER commissioned to install this appliance is wholly responsible for deciding the suitability of any flue arrangement to operate in conjunction with this gas appliance.
1
