Hunter Fan 30785 manual Obtaining Replacement Filters

5.Place the bottom of the filter rim behind the ridges on each side of the bottom of the unit. Refer to Fig. 11.

RIDGE

Fig. 11

6.Lift the Filter Tab and press the top of the filter into the Air Purifier. To avoid damaging the filter, you should press only on the filter’s frame. When the new filter is in place, release the Filter Tab.

7.Place the front grill back onto the unit. Refer to Figs. 7, pg. 7. NOTE:

This unit will not operate unless the grill is in the correct position.

8.Plug the unit in and continue operating it normally.

9.To reset the QuietFlo® Main Filter Life Counter to zero, press and hold the QuietFlo® Main Filter Life Counter Reset Key for three seconds.

When the display shows 100%, release the Key. The Counter is now reset.

Obtaining Replacement Filters

To obtain replacement filters for your Air Purifier, first determine your model number by looking at the information label on the bottom of the Air Purifier. The model num- ber will be listed on the label. Then, call 1-800-4HUNTER for your nearest retailer or Hunter Customer Service at 1-800-313-3326 (CAN 1-888-855-8300) to order directly. To order online, visit our Website at www.hunterfan.com. To ensure that you obtain the correct filters, please find your model number below that specifies the correct replacement filters.

Hunter Air Purifier Model No.:	37785
Carbon Odor Filter Replacement Model No.:	30901
HEPAtech® Filter Replacement Model No.:	30943

42937-01 12