Hunter Fan 41923 warranty Assembling the Blades, Detail, Steps 7-1

7 • Assembling the Blades

Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).

Step 7-1 (Detail)

7-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.

7-2. Attach each blade to a blade iron using three blade assembly

screws. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal.

7-3. Some blade mounting screws are installed in the motor to secure shipping blocks. Remove the blade mountings screws and

Grommet rubber bumpers from the motor. Save the screws and discard the bumpers.

7-4. For each blade, insert one blade mounting screw through the

	Blade Assembly	blade iron, and attach lightly to the fan. Insert the second blade
		mounting screw, then securely tighten both mounting screws.
Use with grommet	Screws
			Steps 7-1 – 7-2

10

Use without grommet

Blade Mounting

Screw

Step 7-4

Hunter Fan Company 41923-01 • 11/21/05