Hunter Fan 41923 warranty Troubleshooting, Problem Nothing happens fan does not move

11 • Troubleshooting

Problem: Nothing happens; fan does not move.

1.Turn power on, replace fuse, or reset breaker.

2.Loosen canopy, check all connections according to the wiring the fan section.

3.Check the plug connection in the switch housing.

4.Push motor reversing switch firmly left or right to ensure that the switch is engaged.

5.Remove the shipping bumpers

6.If the transmitter LED light does not come on, replace the battery with a new 12-volt alkaline battery. If the LED light does come on but the fan will not work, check the settings in the receiver and transmitter. Refer to 4• Setting the Remote Transmitter and Receiver 7 for more information.

Problem: Noisy operation.

	1.	Tighten the blade bracket screws until snug.
	2.	Tighten the blade screws until snug.
14	3.	Check to see if the blade is cracked. If so, replace all the blades.
	4.	Be sure that the glass is secure.

Problem: Excessive wobbling.

1.If your fan wobbles when operating, use the enclosed balancing kit and instructions to balance the fan.

2.Tighten all blade and/or blade iron screws.

3.Turn power off, support fan very carefully, and check that the hanger ball is properly seated.

If you need parts or service assistance, please call 888-830-1326 or visit us at our Web site at http://www.hunterfan.com.

Hunter Fan Company

2500 Frisco Avenue

Memphis, Tennessee 38114

Hunter Fan Company 41923-01 • 11/21/05