Existing Construction – accessible from above
| C11 | EXISTING FAN |
|
|
|
OR
NO EXISTING FAN
Remove an existing fan and check to make sure the | Use the motor housing as a template to mark position. |
opening is large enough to accommodate the new |
|
motor housing (9”x 9.75”). |
|
|
| ” |
|
| 75 |
9” | . | |
9 |
| |
Cut out an opening for the housing.
C12 |
F |
E |
Slide the mounting rails into brackets.
C13 |
| C14 |
|
| 5/8 |
| 5/8 | 1/2 |
|
| |
| 1/2 |
|
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
Mark position of screws by using holes as a template.
11
2/16/08 12:25:37 PM
