11 • Troubleshooting
Problem: Nothing happens; fan does not move.
1.Turn power on, replace fuse, or reset breaker.
2.Loosen canopy, check all connections according to the wiring the fan section.
3.Check the plug connection in the switch housing.
4.Push motor reversing switch firmly up or down to ensure that the switch is engaged.
Problem: Noisy operation.
1.Tighten the blade screws until snug.
2.Check to see if the blade is cracked. If so, replace all the blades.
3.Be sure that the glass is secure.
Problem: Excessive wobbling.
| 1. | If your fan wobbles when operating, use the enclosed balancing kit | |
|
| and instructions to balance the fan. | |
| 2. | Tighten all blade and/or blade iron screws. | |
14 | 3. | Turn power off, support fan very carefully, and check that the | |
|
| hanger ball is properly seated. | |
|
|
|
|
|
| If you need parts or service assistance, please call |
|
|
|
| |
|
| http://www.hunterfan.com. |
|
|
| Hunter Fan Company |
|
|
| 2500 Frisco Avenue |
|
|
| Memphis, Tennessee 38114 |
|
|
|
|
|
Hunter Fan Company |