Panasonic DMC-TZ1 Troubleshooting, 105, LCD monitor turns off while the camera is turned on

Others

[PICTURE IS DISPLAYED FOR 4:3 TV]/ [PICTURE IS DISPLAYED FOR 16:9 TV]

•The AV cable is connected to the camera. Press [MENU/SET] if you want to delete this message at once.

•Select [TV ASPECT] in the [SETUP] menu to change the TV aspect. (P23)

•This message also appears when the USB connection cable is connected to the camera only.

In this case, connect the other end of the USB connection cable to a PC or a printer. (P92, 95)

Troubleshooting

If you return the menu settings to the initial settings at the time of purchase, the condition may improve.

Select [RESET] in the [SETUP] menu. (P23)

∫Battery and power source

1:The camera cannot be operated even when it is turned on.

•Is the battery inserted correctly?

–Check the direction of the battery. (P14)

•Is the battery sufficiently charged?

–Use a battery that has been sufficiently charged.

2:The LCD monitor turns off while the camera is turned on.

•Is power save mode (P21) or economy mode (P22) activated?

–Press the shutter button halfway to cancel these modes.

•Is the battery exhausted?

–Charge the battery or replace it with a battery which has enough capacity.

3:The camera turns off immediately after it is turned on.

•Is the battery charge insufficient to operate the camera?

–Use a battery that has been sufficiently charged.

–If you leave the camera on, the batteries will be exhausted. Turn the camera off frequently by using power save mode (P21), economy mode (P22), etc.

105

VQT0V40