Panasonic DMC-TZ1 operating instructions Economy, Shutter, Volume

Preparation

[ECONOMY]

MENU

Press [ SET ] to display the [SETUP] menu and select this item. (P19)

Battery life is saved by reducing the brightness of the LCD monitor and turning it off automatically when the camera is not being used in recording mode.

[LEVEL 1]: The LCD monitor turns off if the camera is not operated for about 15 seconds in recording mode.

[LEVEL 2]: The LCD monitor turns off if the camera is not operated for about 15 seconds in recording mode or for about 5 seconds after taking a picture.

[OFF]: Economy mode cannot be activated.

•In economy mode, the LCD monitor is turned off while the flash is being charged.

•The status indicator lights while the LCD monitor is turned off. Press any button to turn on the LCD monitor again.

•Power save mode is fixed to [2MIN.] in economy mode.

[However, power save mode is not activated when using the AC adaptor (DMW-AC5; optional).]

•Economy mode will not work in simple

mode [ ], when using the AC adaptor (DMW-AC5; optional), recording in motion picture mode, the menu screen is displayed or the self-timer is set.

[BEEP]

Press [ MENUSET ] to display the [SETUP] menu and select this item. (P19)

[	]:	No operation sound
[	]:	Soft operation sound
[	]:	Loud operation sound

•The [BEEP] setting also affects simple mode [ ].

22

[SHUTTER]

Press [ MENUSET ] to display the [SETUP] menu and select this item. (P19)

Set to select the volume of shutter sound.

[	]:	No shutter sound
[	]:	Soft shutter sound
[	]:	Loud shutter sound

•The [SHUTTER] setting also affects simple mode [ ].

[VOLUME]

Press [ MENUSET ] to display the [SETUP] menu and select this item. (P19)

The volume of speakers can be adjusted in 7 steps from level 6 to 0.

•When you connect the camera to a TV, the volume of the TV speakers does not change.

[NO.RESET]

MENU

Press [ SET ] to display the [SETUP] menu and select this item. (P19)

Set this when you want the file number of the next recording to start from 0001. (The folder number is updated and the file number starts from 0001.)

•A folder number between 100 and 999 can be assigned.

When the folder number reaches 999, the number cannot be reset. We recommend formatting the card after saving the data on a PC or elsewhere.

•To reset the folder number to 100, format the built-in memory (P91) or the card first and then use this function to reset the file number.

A reset screen for the folder number will then appear. Select [YES] to reset the folder number.

•Refer to P93 for detailed information about the file number and the folder number.

•The [NO.RESET] setting also affects simple mode [ ].

VQT0V40