Panasonic DMC-TZ1 Audio DUB, Press 4 to stop recording, Cancel The protect icon disappears

Menu Settings

∫Single setting

1 Press 2/1 to select the picture and then press 4 to set/cancel.

	PROTECT THIS
		100_0001
		1/3
	SELECT
	SET/CANCEL	EXIT MENU
SET	The protect icon [		] appears.

CANCEL The protect icon [ ] disappears.

2 Press [MENU/SET] twice to close the menu.

∫Multi setting/To cancel all settings Perform the same operation as in “[DPOF PRINT] Setting the picture to print and the number of prints”. (P84 to 85)

•If you press [MENU/SET] while canceling protection, the canceling will stop halfway.

•The protect setting may not be effective on other equipment.

•If you want to delete protected pictures, cancel their protection.

•Even if you protect pictures in the built-in memory or a card, they will be deleted if the built-in memory or the card is formatted. (P91)

•Even if you do not protect pictures on an SD Memory Card, they cannot be deleted when the card’s write protect switch A is set to [LOCK].

2

•The following functions cannot be used with protected pictures.

–[ROTATE]

–[AUDIO DUB.]

86

[AUDIO DUB.]

Adding audio after taking pictures

MENU

Press [ SET ] to display the [PLAY] mode menu and select the item to set. (P80) You can add the audio after taking a picture.

1 Press 2/1 to select the picture and then press 4 to start audio recording.

AUDIO
	DUB.	100_0001
		1/3
SELECT
START			EXIT MENU

•The message [OVERWRITE AUDIO DATA?] screen appears when audio has already been recorded. Press 3 to select [YES] and then press [MENU/ SET] to start audio recording. (The original audio is overwritten.)

•Audio dubbing cannot be used with the following pictures.

–Motion pictures

–Protected pictures

•Audio dubbing may not work properly on pictures recorded by other equipment.

2 Press 4 to stop recording.

AUDIO

DUB. 100_0001

1/3

STOP

•The audio recording stops automatically if 4 is not pressed after about 10 seconds.

3 Press [MENU/SET] twice to close the menu.

VQT0V40