Panasonic DMC-TZ1 operating instructions Age display setting, Birthday setting

Advanced

High Sensitivity mode

MENU

Press [ SET ] to display the [SCENE MODE] menu and select this mode. (P50)

The sensitivity is set higher than usual allowing for pictures to be taken with faster shutter speeds. This mode helps minimize the blur of moving subjects in situations with inadequate lighting such as a baby in a dimly lit room.

3

•ISO sensitivity is automatically set to the optimal value between [ISO800] and [ISO1600].

•The focus range becomes the same as macro mode. [5 cm (0.16 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶]

•The resolution of the recorded picture decreases slightly because of high sensitivity processing. This is not a malfunction.

•You can take pictures suitable for 4qk6q/ 10k15cm printing.

•The extended optical zoom and digital zoom cannot be used.

1 Baby mode 1/

2 Baby mode 2

Press [ MENUSET ] to display the [SCENE MODE] menu and select this mode. (P50)

This mode takes pictures of a baby with a healthy complexion. When the flash is used, the light from it is weaker than usual. You can set the birthdays of two babies by using [BABY1] and [BABY2].

•The baby’s age can be displayed when playing back pictures.

•The age can also be printed on each picture by using the software [LUMIX

Simple Viewer] or [PHOTOfunSTUDIO-viewer-] in the CD-ROM (supplied). (For information about printing, refer to the separate operating instructions for PC connection.)

∫Age display setting

•If you want the age to be displayed, set the birthday in advance, select [WITH AGE] and press [MENU/SET].

•If you do not want the age to be displayed, select [WITHOUT AGE] and press [MENU/SET].

1			1 BABY1
		3	WITH AGE
			WITHOUT AGE
	9 months 10days		BIRTHDAY SET.
	10:00 DEC. 1.2006		CANCEL SELECT SET	MENU

∫Birthday setting

1Press 3/4 to select [BIRTHDAY SET.] and then press [MENU/SET].

2When the message [PLEASE SET THE BIRTHDAY OF THE BABY] appears, select items (Year/Month/Day) using 2/ 1 and set them using 3/4.

3Press [MENU/SET] to finish the setting.

• If you select [WITH AGE] without setting the birthday in advance, a message is displayed. Press [MENU/SET] and set the birthday in steps 2 and 3.

•The focus range becomes the same as macro mode. [5 cm (0.16 feet) (Wide)/1 m (3.28 feet) (Tele) to ¶]

•After turning on the camera in [BABY1]/ [BABY2] in scene mode or switching to [BABY1]/[BABY2] from other scene modes, the age and current date and time are displayed for about 5 seconds at the bottom of the screen.

•The age display style differs depending on the language setting in the recording mode.

57

VQT0V40