Panasonic DMC-TZ1 Motion Picture Mode, Press the shutter button fully to stop recording

Advanced

Motion Picture Mode

1 Press the shutter button halfway to focus and then press it fully to start recording.

R 20s

5s

•When the subject is focused, the focus indication lights.

•The available recording time A is displayed on the top right and the elapsed recording time B is displayed on the bottom right of the screen.

For example, 1 hour 20 minutes and 30 seconds is displayed as [1h20m30s].

•The available recording time and the elapsed recording time are approximations.

•Audio recording starts simultaneously from the camera’s built-in microphone.

•You can use the zoom while recording. However, the zoom movement becomes slower than usual.

•Zoom or operation sounds may be recorded.

•We recommend setting [CONT.AF] (P76) to [ON]. It can also be set to [OFF], however if you rotate the zoom lever it will become difficult to focus.

64

2 Press the shutter button fully to stop recording.

•If the built-in memory or the card becomes full in the middle of recording, the camera stops recording automatically.

∫Changing the settings for the aspect ratio and the picture quality

1 Press [MENU/SET].

2 Press 3/4 to select [ASPECT RATIO] and then press 1.

REC		1/2
W.BALANCE		AUTO
ASPECT RATIO
PICT.MODE
METERING MODE
AF MODE
SELECT	SET MENU

3 Press 3/4 to select the item and then press [MENU/SET].

4 Press 3/4 to select [PICT.MODE] and then press 1.

REC		1/2
W.BALANCE		AUTO
ASPECT RATIO
PICT.MODE
METERING MODE
AF MODE
SELECT	SET MENU

5 Press 3/4 to select the item and then press [MENU/SET].

If you selected [ ] on the screen shown in step 2

Item	Picture size	fps
30fpsVGA	640k480 pixels	30
10fpsVGA		10
30fpsQVGA	320k240 pixels	30
10fpsQVGA		10

VQT0V40