Preparation

About the Battery

(charging/number of recordable

pictures)

Battery indication

The remaining battery power appears on the screen. [It does not appear when you use the camera with the AC adaptor (DMW-AC5; optional) connected.]

The battery indication turns red and blinks. (The status indicator blinks when the LCD monitor turns off.) Recharge the battery or replace it with fully charged battery.

The battery life

The number of recordable pictures (By CIPA standard in normal picture mode)

Number of

Approx. 250 pictures

recordable pictures

(Approx. 125 min)

 

 

Recording conditions by CIPA standard

Temperature: 23 °C (73.4 °F)/

Humidity: 50% when LCD monitor is on.¢1

Using a Panasonic SD Memory Card (16 MB)¢2

Using the supplied battery.

Starting recording 30 seconds after the camera is turned on. (When the optical image stabilizer function is set to [MODE1].)

Recording once every 30 seconds with full flash every second recording.

Rotating the zoom lever from Tele to Wide or vice versa in every recording.

Turning the camera off every 10 recordings and waiting for the battery temperature to decrease.

CIPA is an abbreviation of [Camera & Imaging Products

Association].

¢1 The number of recordable pictures decreases when the power LCD function or high angle function (P39) are used.

¢2 The card is not supplied.

The number of recordable pictures varies depending on the recording interval time.

If the recording interval time becomes longer, the number of recordable pictures decreases.

[e.g. When recording once every

2 minutes, the number of recordable pictures decreases to about 62.]

Playback time

Playback time Approx. 260 min

The number of recordable pictures and playback time will vary depending on the operating conditions and storing condition of the battery.

Charging

Charging time Approx. 170 min

Charging time and number of recordable pictures with the optional battery pack (CGA-S007A) are the same as above.

The [CHARGE] indicator lights when charging starts.

When the [CHARGE] indicator flashes

• When the battery temperature is excessively high or low, the [CHARGE] lamp flashes and the charging time will be longer than normal.

• The terminals of the charger or the battery are dirty. In this case, wipe them with a dry cloth.

• When the operating time of the camera becomes extremely short even after properly charging the battery, the life of the battery may have expired. Buy a new battery.

Charging conditions

Charge the battery in a temperature between 10 oC to 35 oC (50 oF to 95 oF). (The battery temperature should also be the same.)

The performance of the battery may temporarily deteriorate and the operating time may become shorter in low temperature conditions (e.g. skiing/ snowboarding).

13

VQT0V40

Page 13
Image 13
Panasonic DMC-TZ1 operating instructions About the Battery, Charging/number of recordable Pictures