Panasonic DMC-TZ1 Rotate DISP./ROTATE, Press 2/1 to select the picture and then press

Menu Settings

[ROTATE DISP.]/[ROTATE]

To display the picture rotated

Press [ MENUSET ] to display the [PLAY] mode menu and select the item to set. (P80) This mode allows you to automatically display pictures vertically if they were recorded holding the camera vertically or rotate pictures manually in 90° steps.

∫Rotate display

(The picture is automatically rotated and displayed.)

1 Press 4 to select [ON] and then press [MENU/SET].

PLAY	1/3
SLIDE SHOW
FAVORITE	OFF
ROTATE DISP.	OFF
ROTATE	ON
DPOF PRINT	MENU

	SET
SELECT SET MENU

•The pictures are displayed without being rotated when you select [OFF].

•Refer to P34 for information about how to play back pictures.

2 Press [MENU/SET] to close the menu.

∫Rotate

(The picture is rotated manually.)

1 Press 2/1 to select the picture and then press 4.

ROTATE

100_0001

1/3

SELECT SET EXIT MENU

•The [ROTATE] function is disabled when [ROTATE DISP.] is set to [OFF].

•Motion pictures and protected pictures cannot be rotated.

2 Press 3/4 to select the direction to rotate the picture and then press [MENU/SET].

ROTATE
	MENU
CANCEL SELECT SET MENU	SET

The picture rotates clockwise in steps of 90°.

The picture rotates counter-clockwise in steps of 90°.

3 Press [MENU/SET] twice to close the menu.

∫Example

When rotating clockwise ( )

Original picture

•When [ROTATE DISP.] is set to [ON], pictures recorded holding the camera vertically are played back vertically (rotated).

•If you take pictures when aiming the camera up or down, it may not be possible to display the pictures vertically. (P26)

•The picture may be slightly blurred when the camera is connected to the TV with the AV cable (supplied) and played back vertically.

•When you play back pictures on a PC, they cannot be displayed in the rotated direction unless the OS or software is compatible with Exif. Exif is a file format for still pictures which allows recording information etc. to be added. It was

83

VQT0V40