Panasonic DMC-TZ1 Press 4 to select Dpof Picture and then press MENU/SET, Layout

Connecting to other equipment

•[PAGE LAYOUT]

(Layouts that can be set with this unit)

Settings on the printer are prioritized.

1 photo/page

1 photo/page

2 photo/page

4 photo/page

•An item cannot be selected if the printer does not support the page layout.

∫DPOF picture

•Set the DPOF print setting on the camera in advance. (P84)

1 Press 4 to select

[DPOF PICTURE] and then press [MENU/SET].

PictBridge

SINGLE PICTURE

DPOF PICTURE

		MENU
SELECT	SET MENU	SET

2 Press 3 to select [PRINT START] and then press [MENU/SET].

DPOF

PRINT START

PAPER SIZE

PAGE LAYOUT

DPOF SET	MENU
CANCEL SELECT EXIT MENU	SET

•You cannot select [PRINT START] when the DPOF print setting is not set. Select [DPOF SET] and then set the DPOF print setting. (P84)

•Press [MENU/SET] to cancel printing.

3 Disconnect the USB connection cable after printing.

∫Setting the date printing with the

DPOF print in advance

We recommend setting DPOF date printing with [DPOF PRINT] (P85) in advance when the printer supports it. If you select [DPOF PICTURE], printing starts and the recording date is printed.

∫Layout printing

•When printing a picture several times on 1 sheet of paper

For example, if you want to print a picture 4 times on 1 sheet of paper, set

[PAGE LAYOUT] to [ ] and then set [NUM. OF PRINTS] to 4.

•When printing different pictures on

1 sheet of paper (only in DPOF printing) For example, if you want to print 4 different pictures on 1 sheet of paper, set

[PAGE LAYOUT] to [ ] and then set [COUNT] in [DPOF PRINT] (P84) to 1 for each of the 4 pictures.

•Do not disconnect the USB connection cable

when the cable disconnection warning icon [ ] is displayed. (Depending on the printer, the icon may not be displayed.)

•If the remaining battery power becomes low while the camera and the printer are connected, the status indicator blinks and the alarm beeps. If this happens during printing, press [MENU/SET] and stop printing at once. If not printing, disconnect the USB connection cable.

•The camera is receiving an error message from the printer when the [¥] indication lights orange during printing. After finishing printing, make sure there are no problems with the printer.

•If the total number of DPOF prints or the number of DPOF pictures printed is high, pictures may be printed several times. The remaining number of prints indicated may differ from the number set. This is not a malfunction.

•With date printing, the setting on the printer may take priority over the setting on the camera. Check the date print setting on the printer also.

97

VQT0V40