Hunter Fan 42015-01 Assembling and Hanging the Fan, WARNING Do not carry or lift fan by canopy

3 • Assembling and Hanging the Fan

Standard	Label
Mounting
Washer
Step 3-1	Canopy
Steps 3-2 – 3-4

Downrod

6

Canopy

(with Washer)

Canopy

Trim Ring

Adapter Set Screw

You can assemble your fan for standard or angle mounting as shown in steps 3-1 – 3-6.

3-1. Remove the label from the standard mounting washer inside the canopy. Leave the washer in place.

3-2. To assemble fan to hang down from a flat or angled ceiling, place the canopy with washer, and canopy trim ring around the adapter so that they rest on the fan assembly.

3-3. Feed the wires from the fan through the downrod.

3-4. Screw the downrod into the fan assembly. Tighten the allen head set screw using the included allen wrench.

CAUTION: e downrod has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from unscrewing. Once assembled, do not remove the downrod.

WARNING: Do not carry or lift fan by canopy.

3-5. Raise the fan and place the ball into the hanger bracket.

3-6. Align the notch on the ball with the indent in the hanger bracket. (Rotate the fan until you hear the notch pop into place.)

WARNING: Fan may fall if not assembled as directed in these installation instructions.

Indent

Steps 3-5 – 3-6

Hunter Fan Company 42015-01 • 02/15/05