Hunter Fan 42027-01 manual Completing Your Installation With or Without a Light Fixture

7 • Completing Your Installation With or Without a Light Fixture (Continued)

	Lower
Plug	Switch
Connector	Housing

Cardboard	Screw
Step 7-5
	Plug
	Connector
12	Detail

Housing

Assembly

Screw

Note: If you do not want to install the light fixture, see “Uninstalling the Light Fixture” on page 14.

7-5. To attach the lower switch housing, connect the upper plug connector from the motor to the lower plug connector in the lower switch housing assembly.

Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product.

7-6. Place the lower switch housing assembly over the upper switch housing. Align the side screw holes in the upper and lower switch housings. Attach the lower switch housing to the upper switch housing with three #6-32 x 3/8” housing assembly screws. You will need to rotate the blade irons out of the way for each screw.

Step 7-6

Hunter Fan Company 42027-01 • 12/09/05