Installing the Glass Bowl
1.Install three candelabra bulbs (40 Watts maximum each).
2.Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
3.read the fan pull chain and light pull chain through the holes in the metal disk.
4.Place the pull chain cap up against the glass bowl. Align the holes in the cap and glass bowl.
5.read the fan pull chain and light pull chain through the appropriate holes in the pull chain cap.
6.Screw the finial onto the threaded pipe until tight.
7.Remove the protective wrap from the silhouette on the light fixture before starting the fan.
Attaching e Pull Chain Pendents
Insert the end of the fan pull chain between the hooks on the pull chain pendant. Pull tight to capture the link between the hooks. Repeat for light pull chain.
Metal Disk | Silhouette |
|
Steps 1 – 3
Breakaway
Connector
Glass Bowl |
| Pipe |
|
| Pull Chain Cap |
Steps 4 – 6 |
| Finial |
| ||
|
|
13
Hunter Fan Company |
