Hunter Fan 42027-01 manual Assembling the Blades, Insert them by hand into the holes on the blades

6 • Assembling the Blades

Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).

	6-1.	Your fan may include blade grommets. If your fan has grommets,
Step 6-1 (Detail)		insert them by hand into the holes on the blades.
	6-2.	Attach each blade to a blade iron using three blade assembly
		screws. If you used grommets, the blades may appear slightly loose
		after screws are tightened. is is normal.
	6-3.	Remove the blade mounting screws and rubber shipping bumpers
		from the motor. Note: Some blade mounting screws are installed
		in the motor to secure shipping blocks.
	6-4.	For each blade, insert one blade mounting screw through the
Grommet		blade iron, and attach lightly to the fan. Insert the second blade
		mounting screw, then securely tighten both mounting screws.

	Blade Assembly
		Steps 6-1 – 6-2
Use with grommet	Screws

10

Use without grommet

Blade Mounting

Screw

Step 6-4

Hunter Fan Company 42027-01 • 12/09/05