7 • Completing Your Installation With or Without a Light Fixture (Continued)
12
Uninstalling the Light Fixture
1. | To uninstall the light fixture, first disconnect the plug connectors |
| |
| between the black wire and the red wire. | Lower Switch | |
2. | Disconnect the plug connectors between the two white wires. | ||
Housing | |||
|
|
3.Uninstall the nut and washer from the end of the light fixture inside the lower switch housing.
4.Unscrew the threaded rod of the light fixture from the lower switch housing.
5. Remove the light fixture from the lower switch housing pulling | Threaded Rod |
disconnected wires through the hole in the center of the lower switch | |
housing. |
|
Note: When removing the wires, pull the thin plug connector (male) |
|
through first, and then pull the other plug connector (female) through |
|
the hole. |
|
6.Install the dummy terminals (included in the sack parts) on the two disconnected wires in the lower switch housing.
7.Install the switch housing cap and plug button to the lower switch
housing. | Steps 3 - 5 |
|
Male Dummy
Terminal
Female Dummy
Terminal
Cap
Plug Button
Step 7
Hunter Fan Company |
