13
42656-01•08/14/09•HunterFanCompany
9 • Tro ubl esh oot ing
Problem: Nothing happens; fan does not move.
1.Turnpoweron,replacefuse,orresetbreaker.
2. Loosen canopy, check all connections according to the wiring the
fan section.
3. Check the plug connection in the switch housing.
4. Push motor reversing switch firmly left or right to ensure that the
switch is engaged.
5. Pull the pull chain to ensure it is on.
6.Removetheshippingbumpers.
Problem: Noisy operation.
1.Tightenthebladebracketscrewsuntilsnug.
2.Tightenthebladescrewsuntilsnug.
3. Check to see if the blade is cracked. If so, replace all the blades.
4. Change to an approved speed control.
5. Be sure that the glass is secure.
6. Check and tighten the screws in the switch housing mounting
plate and in the upper and lower switch housing.
Problem: Excessive wobbling.
1. If your fan wobbles when operating, use the enclosed balancing kit
and instructions to balance the fan.
2.Tightenallbladeironscrews.
3.Turnpowero,supportfanverycarefully,andcheckthatthe
hanger ball is properly seated.
Problem: Lights dim when turned on or do not turn on
1. Check to make sure wattage of light bulbs installed match
the specifications on the light socket.
Problem: If the light on this fan shuts o suddenly.
1.Turnthepowertothefanoatthewallswitch.Wait30
seconds, then resume power to the fan.
If you need parts or service assistance, please call
888-830-1326(InCanada,call1-866-268-1936)or
visit us at our Web site at
http://www.hunterfan.com.
HunterFanCompany
7130GoodlettFarmsPkwy.#400
Memphis,Tennessee38016