7
42656-01•08/14/09•HunterFanCompany
4 • Ha ngi ng and Wi rin g t he Fan
4-1.Raisethefanandaligntheslotsinthecanopy���withthehooksonthe
ceiling plate.
Note: Tohangthefan,youmusttiltthecanopytoanalmostvertical
position so that the canopy slots sit on the ceiling plate hooks.
All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualified electrician.
Wall switches are not included. Select an acceptable general-use switch in
accordance with national and local electrical codes.
4-2. Make sure the power to the outlet box and associated wall switch
locationisstillOFF.
  Toconnectthewires,holdthebaremetalleadstogetherandplacea
wire connector over them, then twist the wire connector clockwise
until tight.
CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
Single Switch Wiring:
  Ifyouwantto,youcancontrolbothfanandlightwithoneswitch.To
do so connect the wires as follows:
•ebareorgreengroundwirefromtheceilingtothegreen
ground wire from the ceiling plate and the green ground wire
from the fan
•ewhitewirefromtheceilingtothewhitewirefromthefan
•eblackwirefromtheceilingtotheblackandtheblack/white
wire from the fan
Dual Switch Wiring:
  • ebareorgreengroundwirefromtheceilingtothegreen
ground wire from the pipe ball assembly
•ewhitewirefromtheceilingtothewhitewirefromthefan
•eblackwirefromtheceilingtotheblackwirefromthefan
•eblack/whitewirefromthefantothewireforthewallswitch
4-3. Push all wires and wire connectors into the outlet box.
Single Switch Wiring
Dual Switch Wiring
Wire
Connector