Hunter Fan 42701-01 warranty Wiring the Fan

All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician.

Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes.

4-1. Make sure the power to the outlet box and associated wall switch location is still OFF.

To connect the wires, hold the bare metal leads together and place a wire nut over them, then twist the wire nut clockwise until tight.

CAUTION: Be sure no bare wire or wire strands are visible after making connections.

Connect the wires as follows:

•e bare or green ground wire from the ceiling to the green ground wire from the ceiling plate and the green ground wire from the fan

•e white wire from the ceiling to the white wire from the fan

•e black wire from the ceiling to the black and the black/white wire from the fan

4-2. Push all wires and wire nuts into the outlet box.

4 • Wiring the Fan

Wire Nut

Single Switch Wiring

7

42701-01 • 01/25/06 Hunter Fan Company