Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).
6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.
6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal.
6-3. Remove the blade mounting screws and rubber shipping bumpers from the motor. Note: Some blade mounting screws are installed in the motor to secure shipping blocks during shipment.
6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws.
| | Blade Assembly |
Use with grommet | | Screws |
| |
| | | |
| | | |
| | | |
| | | |
Use without grommet
Blade Mounting
Screw 
