Installing the Glass Bowl
7-13. First install B10 candelabra bulbs (60 Watt Maximum) into the sockets.
7-14. Attach the extra pull chain (included) to the fan pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
7-15. Thread the fan pull chain (coming from the side of the light kit) down through the closest hole in the metal disc. Then, thread the fan chain through the bottom of the glass bowl, and finally through the grommet hole in the cover plate.
7-16. Thread the light pull chain (coming from the center of the light kit) through the bottom of the glass bowl and the center of the cover plate.
7-17. Place the cover plate up against the glass bowl. Align the holes in the cover plate and glass bowl.
7-18. Thread the light pull chain through the center of the finial.
7-19. Screw the finial onto the threaded rod end until tight.
7-20. Attach the extra pull chain (included) to the light pull chain using the plastic breakaway connector. (You may find the plastic breakaway connector on the end of the extra chain.)
Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation.
Threaded Rod
Light Pull Chain
Glass Bowl
Cover Plate