Hunter Fan 42819-01 warranty Installing the Motor Housing, Assembling the Blades

5 • Installing the Motor Housing

6 • Assembling the Blades

Step 5-1

Motor

Fan Housing

Step 5-3

5-1. Place the fan housing over the motor.

5-2. Align the keyholes in the fan housing with the two partially installed canopy screws in the hanger bracket. Rotate the fan housing to situate the screws in the narrow ends of the keyholes.

5-3. Install the two remaining canopy screws into the holes in the fan housing and into the hanger bracket. Securely tighten all screws.

Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan).

6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades.

6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal.

6-3. Some blade mounting screws are installed in the motor to secure shipping blocks. Remove the blade mounting screws and rubber bumpers from the motor. Save the screws and discard the bumpers.

6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws.

Step 6-1 (Detail)

Grommet

8

Canopy Screw

	Blade Assembly		Steps 6-1 – 6-2
Use with grommet		Screws		9

Use without grommet

Blade

Mounting

Screw

Step 6-4

Hunter Fan Company 42819-01 • 11/14/06

42819-01 • 11/14/06 Hunter Fan Company